Horn Driver   Full Range   Mids   Horn   5 inch woofer   6 inch woofer   8 inch woofer   10 inch woofer   12 inch woofer   15 inch woofer   18 inch woofer   21 inch woofer   Coaxial speaker   Alnico   Heritage   Signature   Classic   Originals   Bass_Guitar   PA Repair Kits   Guitar Repair Kits   no longer sold  

Celestion

Founded in 1924, Celestion has grown to become one of the world's largest and most innovative manufacturers of loudspeakers.

Responsible for the first ever dedicated guitar speaker, Celestion drivers have become the "voice of rock & roll", delivering many of the most memorable performances by guitarists including Jimi Hendrix and Slash through to the current crop of high-octane shredders.

Especially the innovation in LF and compression drivers places Celestion at the heart of the professional sound reinforcement industry, relied upon by many of the world's leading manufacturers to deliver the sound of a great show.

Celestion has an annual turnover of more than 1 Billion US-Dollars. On 30 000 m2 facility more than 1400 highly-trained employees share a singular commitment to quality.

To our kits with Celestion loudspeakers.
 


 

Compression driver for Horns

CDX1-1010       order no. cel-t5829       EUR 35,50 excl. VAT: € 29.83 / $ 35.20
1 inch high frequency compression driver with high quality cone.
  • power handling (continuous/programme) = 15 W
  • frequency range = 1500-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 107 dB (2,83V; 1m)
  • voice coil diameter = 25 mm
  • overall diameter d = 90 mm
  • mounting depth (not countersunk) t = 52,8 mm
  • mass m = 0,83 kg
PDF data sheet

show kits to this chassis hide kits

CDX1-1445       order no. cel-t5762       EUR 58,00 excl. VAT: € 48.74 / $ 57.51
1 inch high frequency compression driver with high quality cone.
  • power handling (continuous/programme) = 20 W
  • frequency range = 1500-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 106 dB (2,83V; 1m)
  • voice coil diameter = 35 mm
  • overall diameter d = 90 mm
  • mounting depth (not countersunk) t = 52 mm
  • mass m = 1 kg
PDF data sheet

show kits to this chassis hide kits

CDX1-1445, 16 Ohm       order no. cel-t5823       EUR 58,00 excl. VAT: € 48.74 / $ 57.51
1 inch high frequency compression driver with high quality cone.
  • power handling (continuous/programme) = 20 W
  • frequency range = 1500-20000 Hz
  • impedance R = 16 Ohm
  • sound pressure level SPL = 103 dB (2,83V; 1m)
  • voice coil diameter = 35 mm
  • overall diameter d = 90 mm
  • mounting depth (not countersunk) t = 52 mm
  • mass m = 1 kg
PDF data sheet

show kits to this chassis hide kits

CDX1-1446       order no. cel-t5796       EUR 58,00 excl. VAT: € 48.74 / $ 57.51
1 inch high frequency compression driver with high quality cone.
  • power handling (continuous/programme) = 20 W
  • frequency range = 1500-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 106 dB (2,83V; 1m)
  • voice coil diameter = 35 mm
  • overall diameter d = 90 mm
  • mounting depth (not countersunk) t = 69 mm
  • mass m = 1,1 kg
PDF data sheet

show kits to this chassis hide kits

CDX1-1745       order no. cel-t5363       EUR 89,00 excl. VAT: € 74.79 / $ 88.25
1 inch high frequency compression driver with high quality cone.
  • power handling (continuous/programme) = 40 W
  • frequency range = 1200-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 110 dB (2,83V; 1m)
  • voice coil diameter = 44 mm
  • overall diameter d = 120 mm
  • mounting depth (not countersunk) t = 56 mm
  • mass m = 2,3 kg
PDF data sheet

show kits to this chassis hide kits

CDX1-1745, 16 Ohm       order no. cel-t5427       EUR 89,00 excl. VAT: € 74.79 / $ 88.25
1 inch high frequency compression driver with high quality cone.
  • power handling (continuous/programme) = 40 W
  • frequency range = 1200-20000 Hz
  • impedance R = 16 Ohm
  • sound pressure level SPL = 107 dB (2,83V; 1m)
  • voice coil diameter = 44 mm
  • overall diameter d = 120 mm
  • mounting depth (not countersunk) t = 56 mm
  • mass m = 2,3 kg
PDF data sheet

show kits to this chassis hide kits

CDX1-1746       order no. cel-t5487       EUR 89,00 excl. VAT: € 74.79 / $ 88.25
1 inch high frequency compression driver with high quality cone.
  • power handling (continuous/programme) = 40 W
  • frequency range = 1200-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 110 dB (2,83V; 1m)
  • voice coil diameter = 44 mm
  • overall diameter d = 120 mm
  • mounting depth (not countersunk) t = 56 mm
  • mass m = 3 kg
PDF data sheet

show kits to this chassis hide kits

CDX1-1747       order no. cel-t5848       EUR 89,00 excl. VAT: € 74.79 / $ 88.25
1 inch high frequency compression driver with high quality cone.
  • power handling (continuous/programme) = 60 W
  • frequency range = 1000-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 110 dB (2,83V; 1m)
  • voice coil diameter = 44 mm
  • overall diameter d = 120 mm
  • mounting depth (not countersunk) t = 53 mm
  • mass m = 2,3 kg
PDF data sheet

show kits to this chassis hide kits

CDX14-3030       order no. cel-t5896       EUR 207,00 excl. VAT: € 173.95 / $ 205.26
1.4 inch high frequency compression driver with titanium cone.
  • power handling (continuous/programme) = 75 W
  • frequency range = 500-18000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 106,5 dB (2,83V; 1m)
  • voice coil diameter = 75 mm
  • overall diameter d = 180 mm
  • mounting depth (not countersunk) t = 68 mm
  • mass m = 4,88 kg
PDF data sheet

show kits to this chassis hide kits

CDX14-3060       order no. cel-t5827       EUR 217,00 excl. VAT: € 182.35 / $ 215.18
1.4 inch high frequency compression driver with titanium cone.
  • power handling (continuous/programme) = 75 W
  • frequency range = 500-18000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 106,5 dB (2,83V; 1m)
  • voice coil diameter = 75 mm
  • overall diameter d = 180 mm
  • mounting depth (not countersunk) t = 71 mm
  • mass m = 4,88 kg
PDF data sheet

show kits to this chassis hide kits

CDX20-3075       order no. cel-t5838       EUR 227,00 excl. VAT: € 190.76 / $ 225.09
2 inch high frequency compression driver with titanium cone.
  • power handling (continuous/programme) = 75 W
  • frequency range = 500-18000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 107 dB (2,83V; 1m)
  • voice coil diameter = 75 mm
  • overall diameter d = 180 mm
  • mounting depth (not countersunk) t = 71 mm
  • mass m = 4,8 kg
PDF data sheet

show kits to this chassis hide kits

CDX1-1415       order no. cel-t5343       EUR 85,00 excl. VAT: € 71.43 / $ 84.29
1 inch high frequency compression driver with high quality cone.
  • power handling (continuous/programme) = 20 W
  • frequency range = 2000-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 104 dB (2,83V; 1m)
  • voice coil diameter = 35 mm
  • overall diameter d = 90 mm
  • mounting depth (not countersunk) t = 57 mm
  • mass m = 0,25 kg
PDF data sheet

show kits to this chassis hide kits

CDX1-1425       order no. cel-t5344       EUR 116,00 excl. VAT: € 97.48 / $ 115.03
1 inch high frequency compression driver with high quality cone.
  • power handling (continuous/programme) = 25 W
  • frequency range = 2000-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 108 dB (2,83V; 1m)
  • voice coil diameter = 35 mm
  • overall diameter d = 90 mm
  • mounting depth (not countersunk) t = 58 mm
  • mass m = 0,5 kg
PDF data sheet

show kits to this chassis hide kits

CDX1-1430       order no. cel-t5367       EUR 136,00 excl. VAT: € 114.29 / $ 134.86
1 inch high frequency compression driver with high quality cone.
  • power handling (continuous/programme) = 50 W
  • frequency range = 2000-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 108 dB (2,83V; 1m)
  • voice coil diameter = 35 mm
  • overall diameter d = 90 mm
  • mounting depth (not countersunk) t = 58 mm
  • mass m = 0,6 kg
PDF data sheet

show kits to this chassis hide kits

CDX1-1720       order no. cel-t5713       EUR 187,00 excl. VAT: € 157.14 / $ 185.43
1 inch high frequency compression driver with titanium cone.
  • power handling (continuous/programme) = 50 W
  • frequency range = 800-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 107 dB (2,83V; 1m)
  • voice coil diameter = 44 mm
  • overall diameter d = 88,5 mm
  • mounting depth (not countersunk) t = 55 mm
  • mass m = 0,65 kg
PDF data sheet

show kits to this chassis hide kits

CDX1-1730       order no. cel-t5485       EUR 173,00 excl. VAT: € 145.38 / $ 171.55
1 inch high frequency compression driver with high quality cone.
  • power handling (continuous/programme) = 40 W
  • frequency range = 1200-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 110 dB (2,83V; 1m)
  • voice coil diameter = 44 mm
  • overall diameter d = 88,5 mm
  • mounting depth (not countersunk) t = 55 mm
  • mass m = 0,65 kg
PDF data sheet

show kits to this chassis hide kits

CDX1-1731       order no. cel-t5486       EUR 173,00 excl. VAT: € 145.38 / $ 171.55
1 inch high frequency compression driver with high quality cone.
  • power handling (continuous/programme) = 40 W
  • frequency range = 1200-20000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 110 dB (2,83V; 1m)
  • voice coil diameter = 44 mm
  • overall diameter d = 88,5 mm
  • mounting depth (not countersunk) t = 57 mm
  • mass m = 0,65 kg
PDF data sheet

show kits to this chassis hide kits

CDX14-2420       order no. cel-t5779       EUR 355,00 excl. VAT: € 298.32 / $ 352.02
1.4 inch high frequency compression driver with titanium cone.
  • power handling (continuous/programme) = 70 W
  • frequency range = 800-20000 Hz
  • impedance R = 16 Ohm
  • sound pressure level SPL = 106,5 dB (2,83V; 1m)
  • voice coil diameter = 60 mm
  • overall diameter d = 116 mm
  • mounting depth (not countersunk) t = 56 mm
  • mass m = 1,5 kg
PDF data sheet

show kits to this chassis hide kits

CDX14-3050       order no. cel-t5640       EUR 415,00 excl. VAT: € 348.74 / $ 411.51
1.4 inch high frequency compression driver with titanium cone.
  • power handling (continuous/programme) = 75 W
  • frequency range = 500-18000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 106,5 dB (2,83V; 1m)
  • voice coil diameter = 75 mm
  • overall diameter d = 125 mm
  • mounting depth (not countersunk) t = 56 mm
  • mass m = 1,7 kg
PDF data sheet

show kits to this chassis hide kits

CDX20-3000       order no. cel-t5683       EUR 387,00 excl. VAT: € 325.21 / $ 383.75
2 inch high frequency compression driver with titanium cone.
  • power handling (continuous/programme) = 75 W
  • frequency range = 500-18000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 107 dB (2,83V; 1m)
  • voice coil diameter = 75 mm
  • overall diameter d = 125 mm
  • mounting depth (not countersunk) t = 94 mm
  • mass m = 2 kg
PDF data sheet

show kits to this chassis hide kits

CDX20-3000, 16 Ohm       order no. cel-t5757       EUR 387,00 excl. VAT: € 325.21 / $ 383.75
2 inch high frequency compression driver with titanium cone.
  • power handling (continuous/programme) = 75 W
  • frequency range = 500-18000 Hz
  • impedance R = 16 Ohm
  • sound pressure level SPL = 104 dB (2,83V; 1m)
  • voice coil diameter = 75 mm
  • overall diameter d = 125 mm
  • mounting depth (not countersunk) t = 94 mm
  • mass m = 2 kg
PDF data sheet

show kits to this chassis hide kits


 

Full Range

AN2075       order no. cel-t5819       EUR 40,00 excl. VAT: € 33.61 / $ 39.66
56,2 x 56,2 cm full range driver with aluminium cone.
  • power handling (continuous/programme) = 20 W
  • frequency range = 160-19000 Hz
  • resonance frequency fs = 160 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 80 dB (2,83V; 1m)
  • DC resistance Re = 5,28 Ohm
  • force factor BL = 2,6 N/A
  • effective piston radiating area Sd = 12,57 cm2
  • effective mechanical mass incl. air load mms = 1,37 g
  • equivalent volume of compliance Vas = 0,12 l
  • total Q factor Qts = 1,09 (Qms=10,12, Qes=1,22)
  • voice coil diameter = 20 mm
  • maximum peak linear excursion vibration xlin = +/- 1,5 mm
  • mounting diameter d = 51,1 mm
  • overall diameter d = 56,2 x 56,2 mm
  • mounting depth (not countersunk) t = 43,5 mm
  • mass m = 0,097 kg
PDF data sheet

show kits to this chassis hide kits

AN2775       order no. cel-t5820       EUR 42,00 excl. VAT: € 35.29 / $ 41.65
71,3 x 71,3 cm full range driver with aluminium cone.
  • power handling (continuous/programme) = 20 W
  • frequency range = 160-20000 Hz
  • resonance frequency fs = 150 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 84 dB (2,83V; 1m)
  • DC resistance Re = 5,2 Ohm
  • force factor BL = 2,43 N/A
  • effective piston radiating area Sd = 28,27 cm2
  • effective mechanical mass incl. air load mms = 1,83 g
  • equivalent volume of compliance Vas = 0,58 l
  • total Q factor Qts = 1,47 (Qms=12,21, Qes=1,67)
  • voice coil diameter = 20 mm
  • maximum peak linear excursion vibration xlin = +/- 1,5 mm
  • mounting diameter d = 66,1 mm
  • overall diameter d = 71,3 x 71,3 mm
  • mounting depth (not countersunk) t = 45 mm
  • mass m = 0,1 kg
PDF data sheet

show kits to this chassis hide kits

AN3510       order no. cel-t5801       EUR 50,00 excl. VAT: € 42.02 / $ 49.58
89,3 x 89,3 cm full range driver with aluminium cone.
  • power handling (continuous/programme) = 35 W
  • frequency range = 98-18500 Hz
  • resonance frequency fs = 98 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87 dB (2,83V; 1m)
  • DC resistance Re = 5,73 Ohm
  • force factor BL = 4,5 N/A
  • effective piston radiating area Sd = 38,48 cm2
  • effective mechanical mass incl. air load mms = 3,37 g
  • equivalent volume of compliance Vas = 1,3 l
  • total Q factor Qts = 0,6 (Qms=6,59, Qes=0,66)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 1,25 mm
  • mounting diameter d = 78,8 mm
  • overall diameter d = 89,3 x 89,3 mm
  • mounting depth (not countersunk) t = 50 mm
  • mass m = 0,16 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 32 L volume
from 103/65 Hz (-3dB/-8dB)
 
recommended cabinet 2:
130 L volume bass reflex cabinet
with 4x HP100 reflex tube, 11 cm long.
from 47/40 Hz (-3dB/-8dB).

K12H-100TC       order no. cel-t5402       EUR 83,00 excl. VAT: € 69.75 / $ 82.30
30 cm full range driver with paper with kevlar cone.
  • power handling (continuous/programme) = 100 W
  • frequency range = 50-10000 Hz
  • resonance frequency fs = 67,5 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 5,43 Ohm
  • force factor BL = 13,16 N/A
  • effective mechanical mass incl. air load mms = 43,67 g
  • equivalent volume of compliance Vas = 50,7 l
  • total Q factor Qts = 0,52 (Qms=5,381, Qes=0,581)
  • voice coil diameter = 45 mm
  • maximum peak linear excursion vibration xlin = +/- 1 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 129,7 mm
  • mass m = 3,8 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 36 L volume
from 93/59 Hz (-3dB/-8dB)
 
recommended cabinet 2:
146 L volume bass reflex cabinet
with 2x HP100 reflex tube, 3 cm long.
from 43/36 Hz (-3dB/-8dB).

K12H-200TC       order no. cel-t5870       EUR 91,00 excl. VAT: € 76.47 / $ 90.24
30 cm full range driver with paper with kevlar cone.
  • power handling (continuous/programme) = 200 W
  • frequency range = 50-10000 Hz
  • resonance frequency fs = 60 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 5,61 Ohm
  • force factor BL = 13,535 N/A
  • effective mechanical mass incl. air load mms = 46,51 g
  • equivalent volume of compliance Vas = 60,3 l
  • total Q factor Qts = 0,52 (Qms=4,585, Qes=0,583)
  • voice coil diameter = 50 mm
  • maximum peak linear excursion vibration xlin = +/- 2 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 130,25 mm
  • mass m = 3,9 kg
PDF data sheet

show kits to this chassis hide kits


 

Mids

TF0615MR       order no. cel-t5308       EUR 42,00 excl. VAT: € 35.29 / $ 41.65
16 cm midrange driver with paper with kevlar cone.
  • power handling (continuous/programme) = 50 W
  • frequency range = 500-5000 Hz
  • resonance frequency fs = 500 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 5,7 Ohm
  • voice coil inductance L = 0,27 mH
  • voice coil diameter = 38 mm
  • mounting diameter d = 147 mm
  • overall diameter d = 178 mm
  • mounting depth (not countersunk) t = 74 mm
  • mass m = 1,4 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 1,4 L volume
from 201/127 Hz (-3dB/-8dB)
 
recommended cabinet 2:
5,7 L volume bass reflex cabinet
with HP70 reflex tube, 13 cm long.
from 97/79 Hz (-3dB/-8dB).

NTR06-1705B       order no. cel-t5641       EUR 120,00 excl. VAT: € 100.84 / $ 118.99
17 cm midrange driver with paper with kevlar cone.
  • power handling (continuous/programme) = 150 W
  • frequency range = 150-7000 Hz
  • resonance frequency fs = 109,6 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 95 dB (2,83V; 1m)
  • DC resistance Re = 5,95 Ohm
  • force factor BL = 10,03 N/A
  • voice coil inductance L = 0,24 mH
  • effective mechanical mass incl. air load mms = 12,93 g
  • equivalent volume of compliance Vas = 4,06 l
  • total Q factor Qts = 0,44 (Qms=2,632, Qes=0,527)
  • voice coil diameter = 45 mm
  • maximum peak linear excursion vibration xlin = +/- 2,5 mm
  • mounting diameter d = 150 mm
  • overall diameter d = 189 mm
  • mounting depth (not countersunk) t = 71 mm
  • mass m = 0,85 kg
PDF data sheet

show kits to this chassis hide kits

TF0818MR       order no. cel-t5278       EUR 55,00 excl. VAT: € 46.22 / $ 54.54
19 cm midrange driver with paper with kevlar cone.
  • power handling (continuous/programme) = 100 W
  • frequency range = 800-5000 Hz
  • resonance frequency fs = 450 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 99 dB (2,83V; 1m)
  • DC resistance Re = 6,7 Ohm
  • voice coil inductance L = 0,34 mH
  • voice coil diameter = 45 mm
  • mounting diameter d = 183 mm
  • overall diameter d = 208 mm
  • mounting depth (not countersunk) t = 85 mm
  • mass m = 1,9 kg
PDF data sheet

show kits to this chassis hide kits


 

Horn

H1-7050 'NoBell'       order no. cel-t5134       EUR 30,00 excl. VAT: € 25.21 / $ 29.75
Horn for a compression driver with 1 inch throat.
  • nominal angle (HxV) = 70 x 50 Deg
  • material: aluminium
PDF data sheet

show kits to this chassis hide kits


 

5 inch woofer


open a bigger photo

recommended cabinet 1:
closed cabinet with 1,8 L volume
from 182/115 Hz (-3dB/-8dB)
 
recommended cabinet 2:
7,3 L volume bass reflex cabinet
with HP70 reflex tube, 12 cm long.
from 86/71 Hz (-3dB/-8dB).

TF0510       order no. cel-t5306       EUR 35,00 excl. VAT: € 29.41 / $ 34.71
13 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 30 W
  • frequency range = 130-8000 Hz
  • resonance frequency fs = 106 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 6,43 Ohm
  • force factor BL = 6,5 N/A
  • voice coil inductance L = 0,38 mH
  • effective mechanical mass incl. air load mms = 5,7 g
  • equivalent volume of compliance Vas = 4,2 l
  • total Q factor Qts = 0,47 (Qms=2,4, Qes=0,58)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 1,1 mm
  • mounting diameter d = 117 mm
  • overall diameter d = 151 mm
  • mounting depth (not countersunk) t = 68 mm
  • mass m = 1 kg
PDF data sheet

show kits to this chassis hide kits


 

6 inch woofer

TF0615       order no. cel-t5889       EUR 47,00 excl. VAT: € 39.50 / $ 46.61
16 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 100 W
  • frequency range = 85-6000 Hz
  • resonance frequency fs = 107,2 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 95 dB (2,83V; 1m)
  • DC resistance Re = 7,25 Ohm
  • force factor BL = 9,03 N/A
  • effective mechanical mass incl. air load mms = 11,4 g
  • equivalent volume of compliance Vas = 6,49 l
  • total Q factor Qts = 0,61 (Qms=5,83, Qes=0,682)
  • voice coil diameter = 38 mm
  • maximum peak linear excursion vibration xlin = +/- 2,5 mm
  • mounting diameter d = 147 mm
  • overall diameter d = 178 mm
  • mounting depth (not countersunk) t = 74 mm
  • mass m = 1,4 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 3,4 L volume
from 112/71 Hz (-3dB/-8dB)
 
recommended cabinet 2:
13,1 L volume bass reflex cabinet
with HP70 reflex tube, 19 cm long.
from 54/44 Hz (-3dB/-8dB).

NTR06-1705D       order no. cel-t5642       EUR 165,00 excl. VAT: € 138.66 / $ 163.61
17 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 150 W
  • frequency range = 70-7000 Hz
  • resonance frequency fs = 59,8 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 5,22 Ohm
  • force factor BL = 8,79 N/A
  • voice coil inductance L = 0,17 mH
  • effective mechanical mass incl. air load mms = 17,52 g
  • equivalent volume of compliance Vas = 10,07 l
  • total Q factor Qts = 0,42 (Qms=8,24, Qes=0,446)
  • voice coil diameter = 45 mm
  • maximum peak linear excursion vibration xlin = +/- 4,5 mm
  • mounting diameter d = 150 mm
  • overall diameter d = 189 mm
  • mounting depth (not countersunk) t = 87 mm
  • mass m = 0,95 kg
PDF data sheet

show kits to this chassis hide kits


 

8 inch woofer


open a bigger photo

recommended cabinet 1:
closed cabinet with 4,8 L volume
from 170/107 Hz (-3dB/-8dB)
 
recommended cabinet 2:
19 L volume bass reflex cabinet
with HP70 reflex tube, 3 cm long.
from 81/67 Hz (-3dB/-8dB).

TF0818       order no. cel-t5332       EUR 59,00 excl. VAT: € 49.58 / $ 58.50
19 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 100 W
  • frequency range = 70-6000 Hz
  • resonance frequency fs = 95 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 94 dB (2,83V; 1m)
  • DC resistance Re = 6,4 Ohm
  • force factor BL = 11,36 N/A
  • voice coil inductance L = 0,75 mH
  • effective mechanical mass incl. air load mms = 17,53 g
  • equivalent volume of compliance Vas = 12,6 l
  • total Q factor Qts = 0,44 (Qms=3,83, Qes=0,5)
  • voice coil diameter = 45 mm
  • maximum peak linear excursion vibration xlin = +/- 3,5 mm
  • mounting diameter d = 183 mm
  • overall diameter d = 208 mm
  • mounting depth (not countersunk) t = 99 mm
  • mass m = 2,3 kg
PDF data sheet

show kits to this chassis hide kits



open a bigger photo

recommended cabinet 1:
closed cabinet with 0,73 L volume
from 265/167 Hz (-3dB/-8dB)
 
recommended cabinet 2:
1,3 L volume bass reflex cabinet
with HP70 reflex tube, 41 cm long.
from 178/132 Hz (-3dB/-8dB).

NTR08-2009D       order no. cel-t5668       EUR 343,00 excl. VAT: € 288.24 / $ 340.12
21 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 200 W
  • frequency range = 70-5000 Hz
  • resonance frequency fs = 64,3 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 94,5 dB (2,83V; 1m)
  • DC resistance Re = 5,83 Ohm
  • force factor BL = 18,56 N/A
  • voice coil inductance L = 0,51 mH
  • effective mechanical mass incl. air load mms = 32,21 g
  • equivalent volume of compliance Vas = 13,87 l
  • total Q factor Qts = 0,2 (Qms=2,063, Qes=0,219)
  • voice coil diameter = 50 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 187 mm
  • overall diameter d = 225 mm
  • mounting depth (not countersunk) t = 100 mm
  • mass m = 2,8 kg
PDF data sheet

show kits to this chassis hide kits



open a bigger photo

recommended cabinet 1:
closed cabinet with 3,3 L volume
from 158/99 Hz (-3dB/-8dB)
 
recommended cabinet 2:
12,6 L volume bass reflex cabinet
with HP100 reflex tube, 21 cm long.
from 78/63 Hz (-3dB/-8dB).

NTR08-2011D       order no. cel-t5497       EUR 185,00 excl. VAT: € 155.46 / $ 183.45
21 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 200 W
  • frequency range = 70-6000 Hz
  • resonance frequency fs = 80,3 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 5,85 Ohm
  • force factor BL = 11,22 N/A
  • voice coil inductance L = 0,59 mH
  • effective mechanical mass incl. air load mms = 25,33 g
  • equivalent volume of compliance Vas = 11,3 l
  • total Q factor Qts = 0,41 (Qms=1,33, Qes=0,59)
  • voice coil diameter = 50 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 187 mm
  • overall diameter d = 225 mm
  • mounting depth (not countersunk) t = 100 mm
  • mass m = 1,52 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 0,74 L volume
from 291/184 Hz (-3dB/-8dB)
 
recommended cabinet 2:
1,7 L volume bass reflex cabinet
with HP70 reflex tube, 24 cm long.
from 177/132 Hz (-3dB/-8dB).

FTR08-2011D       order no. cel-t5860       EUR 116,00 excl. VAT: € 97.48 / $ 115.03
21 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 200 W
  • frequency range = 70-6000 Hz
  • resonance frequency fs = 88,4 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 93 dB (2,83V; 1m)
  • DC resistance Re = 5,74 Ohm
  • force factor BL = 12,26 N/A
  • voice coil inductance L = 0,39 mH
  • effective mechanical mass incl. air load mms = 26,94 g
  • equivalent volume of compliance Vas = 8,77 l
  • total Q factor Qts = 0,25 (Qms=2,594, Qes=0,272)
  • voice coil diameter = 50 mm
  • maximum peak linear excursion vibration xlin = +/- 3,5 mm
  • mounting diameter d = 187 mm
  • overall diameter d = 225 mm
  • mounting depth (not countersunk) t = 102 mm
  • mass m = 3,65 kg
PDF data sheet

show kits to this chassis hide kits


 

10 inch woofer


open a bigger photo

recommended cabinet 1:
closed cabinet with 6 L volume
from 152/96 Hz (-3dB/-8dB)
 
recommended cabinet 2:
19 L volume bass reflex cabinet
with HP100 reflex tube, 14 cm long.
from 82/63 Hz (-3dB/-8dB).

TF1020       order no. cel-t5736       EUR 78,00 excl. VAT: € 65.55 / $ 77.34
24 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 150 W
  • frequency range = 60-3000 Hz
  • resonance frequency fs = 60,9 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 5,79 Ohm
  • force factor BL = 13,79 N/A
  • voice coil inductance L = 0,59 mH
  • effective mechanical mass incl. air load mms = 30,92 g
  • equivalent volume of compliance Vas = 37,45 l
  • total Q factor Qts = 0,32 (Qms=2,853, Qes=0,361)
  • voice coil diameter = 50 mm
  • maximum peak linear excursion vibration xlin = +/- 2 mm
  • mounting diameter d = 229 mm
  • overall diameter d = 256 mm
  • mounting depth (not countersunk) t = 110 mm
  • mass m = 3,7 kg
PDF data sheet

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 11,1 L volume
from 120/76 Hz (-3dB/-8dB)
 
recommended cabinet 2:
45 L volume bass reflex cabinet
with HP100 reflex tube, 6 cm long.
from 56/47 Hz (-3dB/-8dB).

BL10-200X       order no. cel-t5621       EUR 82,00 excl. VAT: € 68.91 / $ 81.31
24 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 200 W
  • frequency range = 45-3500 Hz
  • resonance frequency fs = 73 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 94 dB (2,83V; 1m)
  • DC resistance Re = 5,8 Ohm
  • force factor BL = 13,02 N/A
  • voice coil inductance L = 0,92 mH
  • effective mechanical mass incl. air load mms = 32 g
  • equivalent volume of compliance Vas = 22,74 l
  • total Q factor Qts = 0,48 (Qms=3,58, Qes=0,56)
  • voice coil diameter = 50 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 229 mm
  • overall diameter d = 256 mm
  • mounting depth (not countersunk) t = 110 mm
  • mass m = 3 kg
PDF data sheet

show kits to this chassis hide kits



open a bigger photo

recommended cabinet 1:
closed cabinet with 7 L volume
from 126/80 Hz (-3dB/-8dB)
 
recommended cabinet 2:
24 L volume bass reflex cabinet
with HP100 reflex tube, 16 cm long.
from 65/51 Hz (-3dB/-8dB).

NTR10-2520D       order no. cel-t5638       EUR 266,00 excl. VAT: € 223.53 / $ 263.76
25 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 250 W
  • frequency range = 55-3500 Hz
  • resonance frequency fs = 56,7 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 96 dB (2,83V; 1m)
  • DC resistance Re = 6,11 Ohm
  • force factor BL = 14,6 N/A
  • voice coil inductance L = 0,55 mH
  • effective mechanical mass incl. air load mms = 40,22 g
  • equivalent volume of compliance Vas = 33,28 l
  • total Q factor Qts = 0,36 (Qms=2,763, Qes=0,411)
  • voice coil diameter = 64 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 232 mm
  • overall diameter d = 260 mm
  • mounting depth (not countersunk) t = 113 mm
  • mass m = 2,2 kg
PDF data sheet

show kits to this chassis hide kits



open a bigger photo

recommended cabinet 1:
closed cabinet with 4,7 L volume
from 139/88 Hz (-3dB/-8dB)
 
recommended cabinet 2:
13,7 L volume bass reflex cabinet
with HP70 reflex tube, 11 cm long.
from 77/59 Hz (-3dB/-8dB).

NTR10-2520E       order no. cel-t5639       EUR 266,00 excl. VAT: € 223.53 / $ 263.76
25 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 250 W
  • frequency range = 50-3000 Hz
  • resonance frequency fs = 52,4 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 96 dB (2,83V; 1m)
  • DC resistance Re = 5,63 Ohm
  • force factor BL = 16,05 N/A
  • voice coil inductance L = 0,71 mH
  • effective mechanical mass incl. air load mms = 46,4 g
  • equivalent volume of compliance Vas = 33,78 l
  • total Q factor Qts = 0,3 (Qms=3,008, Qes=0,334)
  • voice coil diameter = 64 mm
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 232 mm
  • overall diameter d = 260 mm
  • mounting depth (not countersunk) t = 113 mm
  • mass m = 2,2 kg
PDF data sheet

show kits to this chassis hide kits


 

12 inch woofer

TF1218       order no. cel-t5279       EUR 69,00 excl. VAT: € 57.98 / $ 68.42
30 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 100 W
  • frequency range = 60-4500 Hz
  • resonance frequency fs = 62 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 5,55 Ohm
  • force factor BL = 10,9 N/A
  • voice coil inductance L = 0,57 mH
  • effective mechanical mass incl. air load mms = 39,41 g
  • equivalent volume of compliance Vas = 66,6 l
  • total Q factor Qts = 0,63 (Qms=4,9, Qes=0,72)
  • voice coil diameter = 45 mm
  • maximum peak linear excursion vibration xlin = +/- 2 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 125 mm
  • mass m = 2,7 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 26 L volume
from 105/67 Hz (-3dB/-8dB)
 
recommended cabinet 2:
102 L volume bass reflex cabinet
with 2x HP100 reflex tube, 5 cm long.
from 52/42 Hz (-3dB/-8dB).

TF1220       order no. cel-t5284       EUR 86,00 excl. VAT: € 72.27 / $ 85.28
30 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 150 W
  • frequency range = 60-4000 Hz
  • resonance frequency fs = 55 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 5,54 Ohm
  • force factor BL = 12,7 N/A
  • voice coil inductance L = 0,735 mH
  • effective mechanical mass incl. air load mms = 38,91 g
  • equivalent volume of compliance Vas = 84,7 l
  • total Q factor Qts = 0,42 (Qms=4,3, Qes=0,46)
  • voice coil diameter = 50 mm
  • maximum peak linear excursion vibration xlin = +/- 2 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 131 mm
  • mass m = 5 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 30 L volume
from 100/63 Hz (-3dB/-8dB)
 
recommended cabinet 2:
124 L volume bass reflex cabinet
with 2x HP100 reflex tube, 4 cm long.
from 46/39 Hz (-3dB/-8dB).

TF1225       order no. cel-t5311       EUR 100,00 excl. VAT: € 84.03 / $ 99.16
30 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 250 W
  • frequency range = 50-4000 Hz
  • resonance frequency fs = 63 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 5,13 Ohm
  • force factor BL = 13,2 N/A
  • voice coil inductance L = 0,84 mH
  • effective mechanical mass incl. air load mms = 46,51 g
  • equivalent volume of compliance Vas = 54,5 l
  • total Q factor Qts = 0,5 (Qms=6,7, Qes=0,54)
  • voice coil diameter = 64 mm
  • maximum peak linear excursion vibration xlin = +/- 2,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 130 mm
  • mass m = 4,1 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 14,8 L volume
from 120/76 Hz (-3dB/-8dB)
 
recommended cabinet 2:
56 L volume bass reflex cabinet
with 2x HP100 reflex tube, 11 cm long.
from 59/48 Hz (-3dB/-8dB).

TF1225e       order no. cel-t5323       EUR 115,00 excl. VAT: € 96.64 / $ 114.03
30 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 300 W
  • frequency range = 50-3000 Hz
  • resonance frequency fs = 61,2 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 96 dB (2,83V; 1m)
  • DC resistance Re = 5,07 Ohm
  • force factor BL = 15,41 N/A
  • voice coil inductance L = 1,1 mH
  • effective mechanical mass incl. air load mms = 53,24 g
  • equivalent volume of compliance Vas = 50,6 l
  • total Q factor Qts = 0,4 (Qms=4,8, Qes=0,44)
  • voice coil diameter = 64 mm
  • maximum peak linear excursion vibration xlin = +/- 3,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 139 mm
  • mass m = 4,4 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 26 L volume
from 94/59 Hz (-3dB/-8dB)
 
recommended cabinet 2:
106 L volume bass reflex cabinet
with 2x HP100 reflex tube, 8 cm long.
from 44/37 Hz (-3dB/-8dB).

TF1230       order no. cel-t5703       EUR 135,00 excl. VAT: € 113.45 / $ 133.87
30 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 350 W
  • frequency range = 45-3000 Hz
  • resonance frequency fs = 56,9 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 94 dB (2,83V; 1m)
  • DC resistance Re = 5,18 Ohm
  • force factor BL = 13,29 N/A
  • voice coil inductance L = 1,2 mH
  • effective mechanical mass incl. air load mms = 58,59 g
  • equivalent volume of compliance Vas = 53,3 l
  • total Q factor Qts = 0,49 (Qms=2,411, Qes=0,615)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 140 mm
  • mass m = 4,3 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 6,5 L volume
from 161/102 Hz (-3dB/-8dB)
 
recommended cabinet 2:
19 L volume bass reflex cabinet
with 2x HP100 reflex tube, 25 cm long.
from 90/69 Hz (-3dB/-8dB).

NTR12-3018D       order no. cel-t5491       EUR 281,00 excl. VAT: € 236.13 / $ 278.64
30 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 350 W
  • frequency range = 50-4000 Hz
  • resonance frequency fs = 58,7 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 5,69 Ohm
  • force factor BL = 19,54 N/A
  • voice coil inductance L = 0,78 mH
  • effective mechanical mass incl. air load mms = 57,2 g
  • equivalent volume of compliance Vas = 51,21 l
  • total Q factor Qts = 0,29 (Qms=2,514, Qes=0,326)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 286 mm
  • overall diameter d = 318 mm
  • mounting depth (not countersunk) t = 137 mm
  • mass m = 2,6 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 6,8 L volume
from 160/101 Hz (-3dB/-8dB)
 
recommended cabinet 2:
22 L volume bass reflex cabinet
with 2x HP100 reflex tube, 20 cm long.
from 85/66 Hz (-3dB/-8dB).

FTR12-3070C       order no. cel-t5644       EUR 202,00 excl. VAT: € 169.75 / $ 200.30
30 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 350 W
  • frequency range = 40-4000 Hz
  • resonance frequency fs = 66,1 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 96 dB (2,83V; 1m)
  • DC resistance Re = 5,44 Ohm
  • force factor BL = 18,78 N/A
  • voice coil inductance L = 1,25 mH
  • effective mechanical mass incl. air load mms = 58,51 g
  • equivalent volume of compliance Vas = 39,57 l
  • total Q factor Qts = 0,33 (Qms=2,9, Qes=0,375)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 286 mm
  • overall diameter d = 318 mm
  • mounting depth (not countersunk) t = 102 mm
  • mass m = 6,3 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 5,6 L volume
from 133/84 Hz (-3dB/-8dB)
 
recommended cabinet 2:
20 L volume bass reflex cabinet
with HP100 reflex tube, 18 cm long.
from 68/54 Hz (-3dB/-8dB).

FTR12-4080HDX       order no. cel-t5607       EUR 305,00 excl. VAT: € 256.30 / $ 302.44
30 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 1000 W
  • frequency range = 47-3000 Hz
  • resonance frequency fs = 61,2 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 93 dB (2,83V; 1m)
  • DC resistance Re = 6,05 Ohm
  • force factor BL = 23,81 N/A
  • voice coil inductance L = 1,92 mH
  • effective mechanical mass incl. air load mms = 108,68 g
  • equivalent volume of compliance Vas = 24,79 l
  • total Q factor Qts = 0,37 (Qms=2,228, Qes=0,446)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 8 mm
  • mounting diameter d = 282 mm
  • overall diameter d = 313 mm
  • mounting depth (not countersunk) t = 158 mm
  • mass m = 9,6 kg
PDF data sheet

show kits to this chassis hide kits


 

15 inch woofer

TF1520       order no. cel-t5467       EUR 97,00 excl. VAT: € 81.51 / $ 96.18
37 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 150 W
  • frequency range = 45-4000 Hz
  • resonance frequency fs = 51,7 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 96 dB (2,83V; 1m)
  • DC resistance Re = 5,95 Ohm
  • force factor BL = 11,93 N/A
  • voice coil inductance L = 1,41 mH
  • effective mechanical mass incl. air load mms = 62,33 g
  • equivalent volume of compliance Vas = 157,7 l
  • total Q factor Qts = 0,75 (Qms=6,69, Qes=0,85)
  • voice coil diameter = 50 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 352 mm
  • overall diameter d = 385 mm
  • mounting depth (not countersunk) t = 158 mm
  • mass m = 5 kg
PDF data sheet

show kits to this chassis hide kits

TF1525       order no. cel-t5327       EUR 107,00 excl. VAT: € 89.92 / $ 106.10
37 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 250 W
  • frequency range = 40-3000 Hz
  • resonance frequency fs = 47 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 5,21 Ohm
  • force factor BL = 13,5 N/A
  • voice coil inductance L = 0,82 mH
  • effective mechanical mass incl. air load mms = 78,2 g
  • equivalent volume of compliance Vas = 152,5 l
  • total Q factor Qts = 0,59 (Qms=5,9, Qes=0,66)
  • voice coil diameter = 64 mm
  • maximum peak linear excursion vibration xlin = +/- 2,5 mm
  • mounting diameter d = 351 mm
  • overall diameter d = 385 mm
  • mounting depth (not countersunk) t = 153 mm
  • mass m = 5,2 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 28 L volume
from 74/47 Hz (-3dB/-8dB)
 
recommended cabinet 2:
114 L volume bass reflex cabinet
with 2x HP100 reflex tube, 16 cm long.
from 35/29 Hz (-3dB/-8dB).

TF1525e, 4 Ohm       order no. cel-t5368       EUR 125,00 excl. VAT: € 105.04 / $ 123.95
37 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 300 W
  • frequency range = 45-4500 Hz
  • resonance frequency fs = 45 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 96,5 dB (2,83V; 1m)
  • DC resistance Re = 3,28 Ohm
  • force factor BL = 12,58 N/A
  • effective mechanical mass incl. air load mms = 81,19 g
  • equivalent volume of compliance Vas = 57,33 l
  • total Q factor Qts = 0,47 (Qms=9,18, Qes=0,49)
  • voice coil diameter = 64 mm
  • maximum peak linear excursion vibration xlin = +/- 3,5 mm
  • mounting diameter d = 352 mm
  • overall diameter d = 385 mm
  • mounting depth (not countersunk) t = 161,6 mm
  • mass m = 4,8 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 66 L volume
from 80/51 Hz (-3dB/-8dB)
 
recommended cabinet 2:
272 L volume bass reflex cabinet
with 4x HP100 reflex tube, 6 cm long.
from 37/31 Hz (-3dB/-8dB).

TF1525e       order no. cel-t5328       EUR 125,00 excl. VAT: € 105.04 / $ 123.95
37 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 300 W
  • frequency range = 45-3500 Hz
  • resonance frequency fs = 49,8 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 6,48 Ohm
  • force factor BL = 17,69 N/A
  • voice coil inductance L = 1,32 mH
  • effective mechanical mass incl. air load mms = 82,41 g
  • equivalent volume of compliance Vas = 128,2 l
  • total Q factor Qts = 0,49 (Qms=7,12, Qes=0,53)
  • voice coil diameter = 64 mm
  • maximum peak linear excursion vibration xlin = +/- 3,5 mm
  • mounting diameter d = 352 mm
  • overall diameter d = 385 mm
  • mounting depth (not countersunk) t = 163 mm
  • mass m = 4,8 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 34 L volume
from 95/60 Hz (-3dB/-8dB)
 
recommended cabinet 2:
123 L volume bass reflex cabinet
with 2x HP100 reflex tube, 5 cm long.
from 48/38 Hz (-3dB/-8dB).

TF1530       order no. cel-t5298       EUR 150,00 excl. VAT: € 126.05 / $ 148.74
37 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 400 W
  • frequency range = 40-3000 Hz
  • resonance frequency fs = 45 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 99 dB (2,83V; 1m)
  • DC resistance Re = 5,7 Ohm
  • force factor BL = 18,7 N/A
  • voice coil inductance L = 1,08 mH
  • effective mechanical mass incl. air load mms = 91,85 g
  • equivalent volume of compliance Vas = 141,2 l
  • total Q factor Qts = 0,38 (Qms=4,2, Qes=0,42)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 2 mm
  • mounting diameter d = 352 mm
  • overall diameter d = 385 mm
  • mounting depth (not countersunk) t = 163 mm
  • mass m = 6,1 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 36 L volume
from 94/59 Hz (-3dB/-8dB)
 
recommended cabinet 2:
121 L volume bass reflex cabinet
with 2x HP100 reflex tube, 6 cm long.
from 49/38 Hz (-3dB/-8dB).

TF1530e       order no. cel-t5782       EUR 128,00 excl. VAT: € 107.56 / $ 126.92
37 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 400 W
  • frequency range = 40-3000 Hz
  • resonance frequency fs = 40,9 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 5,09 Ohm
  • force factor BL = 17,318 N/A
  • voice coil inductance L = 0,827 mH
  • effective mechanical mass incl. air load mms = 86,24 g
  • equivalent volume of compliance Vas = 181,72 l
  • total Q factor Qts = 0,34 (Qms=4,073, Qes=0,376)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 4,5 mm
  • mounting diameter d = 352 mm
  • overall diameter d = 385 mm
  • mounting depth (not countersunk) t = 161 mm
  • mass m = 6,5 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 44 L volume
from 89/56 Hz (-3dB/-8dB)
 
recommended cabinet 2:
152 L volume bass reflex cabinet
with 2x HP100 reflex tube, 4 cm long.
from 46/36 Hz (-3dB/-8dB).

FTR15-3070C       order no. cel-t5387       EUR 212,00 excl. VAT: € 178.15 / $ 210.22
37 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 400 W
  • frequency range = 40-4000 Hz
  • resonance frequency fs = 40 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 99 dB (2,83V; 1m)
  • DC resistance Re = 6,5 Ohm
  • force factor BL = 18,7 N/A
  • voice coil inductance L = 0,59 mH
  • effective mechanical mass incl. air load mms = 84,15 g
  • equivalent volume of compliance Vas = 208 l
  • total Q factor Qts = 0,36 (Qms=7,1, Qes=0,38)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 351 mm
  • overall diameter d = 385 mm
  • mounting depth (not countersunk) t = 158 mm
  • mass m = 6,3 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 40 L volume
from 91/57 Hz (-3dB/-8dB)
 
recommended cabinet 2:
148 L volume bass reflex cabinet
with 2x HP100 reflex tube, 4 cm long.
from 45/36 Hz (-3dB/-8dB).

FTR15-3070E       order no. cel-t5499       EUR 223,00 excl. VAT: € 187.39 / $ 221.13
37 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 400 W
  • frequency range = 40-4000 Hz
  • resonance frequency fs = 45,3 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 5,36 Ohm
  • force factor BL = 17,24 N/A
  • voice coil inductance L = 1,3 mH
  • effective mechanical mass incl. air load mms = 88,68 g
  • equivalent volume of compliance Vas = 143,85 l
  • total Q factor Qts = 0,4 (Qms=3,07, Qes=0,46)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 5,5 mm
  • mounting diameter d = 351 mm
  • overall diameter d = 385 mm
  • mounting depth (not countersunk) t = 161 mm
  • mass m = 6,4 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 15 L volume
from 115/73 Hz (-3dB/-8dB)
 
recommended cabinet 2:
36 L volume bass reflex cabinet
with 2x HP100 reflex tube, 26 cm long.
from 70/52 Hz (-3dB/-8dB).

FTR15-4080F       order no. cel-t5458       EUR 287,00 excl. VAT: € 241.18 / $ 284.59
37 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 600 W
  • frequency range = 35-3000 Hz
  • resonance frequency fs = 35 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 5,62 Ohm
  • force factor BL = 23,69 N/A
  • voice coil inductance L = 1,48 mH
  • effective mechanical mass incl. air load mms = 117,83 g
  • equivalent volume of compliance Vas = 182,8 l
  • total Q factor Qts = 0,24 (Qms=3,68, Qes=0,26)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 351 mm
  • overall diameter d = 385 mm
  • mounting depth (not countersunk) t = 170 mm
  • mass m = 9,4 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 12,9 L volume
from 109/69 Hz (-3dB/-8dB)
 
recommended cabinet 2:
32 L volume bass reflex cabinet
with HP100 reflex tube, 17 cm long.
from 65/49 Hz (-3dB/-8dB).

FTR15-4080FD       order no. cel-t5459       EUR 296,00 excl. VAT: € 248.74 / $ 293.51
37 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 1000 W
  • frequency range = 35-2500 Hz
  • resonance frequency fs = 34,3 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 5,37 Ohm
  • force factor BL = 22,89 N/A
  • voice coil inductance L = 1,38 mH
  • effective mechanical mass incl. air load mms = 126,39 g
  • equivalent volume of compliance Vas = 140 l
  • total Q factor Qts = 0,25 (Qms=3,27, Qes=0,27)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 351 mm
  • overall diameter d = 385 mm
  • mounting depth (not countersunk) t = 170 mm
  • mass m = 9,5 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 22 L volume
from 96/60 Hz (-3dB/-8dB)
 
recommended cabinet 2:
66 L volume bass reflex cabinet
with 2x HP100 reflex tube, 18 cm long.
from 52/40 Hz (-3dB/-8dB).

FTR15-4080HDX       order no. cel-t5611       EUR 306,00 excl. VAT: € 257.14 / $ 303.43
37 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 1000 W
  • frequency range = 35-2500 Hz
  • resonance frequency fs = 37,1 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 95 dB (2,83V; 1m)
  • DC resistance Re = 5,89 Ohm
  • force factor BL = 23,15 N/A
  • voice coil inductance L = 1,59 mH
  • effective mechanical mass incl. air load mms = 130,4 g
  • equivalent volume of compliance Vas = 146,3 l
  • total Q factor Qts = 0,31 (Qms=4,67, Qes=0,33)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 8 mm
  • mounting diameter d = 351 mm
  • overall diameter d = 385 mm
  • mounting depth (not countersunk) t = 173 mm
  • mass m = 9,5 kg
PDF data sheet

show kits to this chassis hide kits


 

18 inch woofer


open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 37 L volume
from 87/55 Hz (-3dB/-8dB)
 
recommended cabinet 2:
110 L volume bass reflex cabinet
with 4x HP100 reflex tube, 33 cm long.
from 48/37 Hz (-3dB/-8dB).

FTR18-4080F       order no. cel-t5461       EUR 321,00 excl. VAT: € 269.75 / $ 318.30
44 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 600 W
  • frequency range = 30-3000 Hz
  • resonance frequency fs = 32,7 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 5,31 Ohm
  • force factor BL = 23,31 N/A
  • voice coil inductance L = 1,46 mH
  • effective mechanical mass incl. air load mms = 158,22 g
  • equivalent volume of compliance Vas = 272 l
  • total Q factor Qts = 0,3 (Qms=5,24, Qes=0,32)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 416 mm
  • overall diameter d = 462 mm
  • mounting depth (not countersunk) t = 205 mm
  • mass m = 9,7 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 43 L volume
from 77/48 Hz (-3dB/-8dB)
 
recommended cabinet 2:
114 L volume bass reflex cabinet
with 4x HP100 reflex tube, 45 cm long.
from 44/33 Hz (-3dB/-8dB).

FTR18-4080FD       order no. cel-t5460       EUR 308,00 excl. VAT: € 258.82 / $ 305.41
44 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 1000 W
  • frequency range = 30-2500 Hz
  • resonance frequency fs = 26 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 5,39 Ohm
  • force factor BL = 22,88 N/A
  • voice coil inductance L = 1,41 mH
  • effective mechanical mass incl. air load mms = 172,42 g
  • equivalent volume of compliance Vas = 395,56 l
  • total Q factor Qts = 0,27 (Qms=4,33, Qes=0,29)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 416 mm
  • overall diameter d = 462 mm
  • mounting depth (not countersunk) t = 205 mm
  • mass m = 9,8 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 61 L volume
from 66/42 Hz (-3dB/-8dB)
 
recommended cabinet 2:
239 L volume bass reflex cabinet
with 4x HP100 reflex tube, 22 cm long.
from 32/26 Hz (-3dB/-8dB).

FTR18-4080HDX       order no. cel-t5602       EUR 355,00 excl. VAT: € 298.32 / $ 352.02
44 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 1000 W
  • frequency range = 30-2500 Hz
  • resonance frequency fs = 35,5 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 95 dB (2,83V; 1m)
  • DC resistance Re = 5,01 Ohm
  • force factor BL = 22,11 N/A
  • voice coil inductance L = 1,81 mH
  • effective mechanical mass incl. air load mms = 199 g
  • equivalent volume of compliance Vas = 184,24 l
  • total Q factor Qts = 0,43 (Qms=5,74, Qes=0,46)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 8 mm
  • mounting diameter d = 416 mm
  • overall diameter d = 462 mm
  • mounting depth (not countersunk) t = 205 mm
  • mass m = 9,8 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 31 L volume
from 95/60 Hz (-3dB/-8dB)
 
recommended cabinet 2:
102 L volume bass reflex cabinet
with 4x HP100 reflex tube, 28 cm long.
from 50/39 Hz (-3dB/-8dB).

CF1830E       order no. cel-t5828       EUR 218,00 excl. VAT: € 183.19 / $ 216.17
44 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 700 W
  • frequency range = 30-2500 Hz
  • resonance frequency fs = 40,5 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 94 dB (2,83V; 1m)
  • DC resistance Re = 5,27 Ohm
  • force factor BL = 24,6 N/A
  • voice coil inductance L = 3,24 mH
  • effective mechanical mass incl. air load mms = 167,47 g
  • equivalent volume of compliance Vas = 167,92 l
  • total Q factor Qts = 0,34 (Qms=4,367, Qes=0,371)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 414 mm
  • overall diameter d = 460 mm
  • mounting depth (not countersunk) t = 211,3 mm
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 43 L volume
from 79/50 Hz (-3dB/-8dB)
 
recommended cabinet 2:
172 L volume bass reflex cabinet
with 4x HP100 reflex tube, 21 cm long.
from 38/31 Hz (-3dB/-8dB).

CF1840JD       order no. cel-t5863       EUR 328,00 excl. VAT: € 275.63 / $ 325.24
44 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 1000 W
  • frequency range = 30-2500 Hz
  • resonance frequency fs = 44,2 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 5,29 Ohm
  • force factor BL = 24,758 N/A
  • voice coil inductance L = 0,96 mH
  • effective mechanical mass incl. air load mms = 215,15 g
  • equivalent volume of compliance Vas = 114 l
  • total Q factor Qts = 0,44 (Qms=4,21, Qes=0,496)
  • voice coil diameter = 100 mm
  • maximum peak linear excursion vibration xlin = +/- 10 mm
  • mounting diameter d = 412,6 mm
  • overall diameter d = 460 mm
  • mounting depth (not countersunk) t = 220,35 mm
  • mass m = 11,6 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 28 L volume
from 81/51 Hz (-3dB/-8dB)
 
recommended cabinet 2:
91 L volume bass reflex cabinet
with 2x HP100 reflex tube, 18 cm long.
from 43/33 Hz (-3dB/-8dB).

CF18VJD       order no. cel-t5806       EUR 448,00 excl. VAT: € 376.47 / $ 444.24
44 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 1600 W
  • frequency range = 25-1500 Hz
  • resonance frequency fs = 34,3 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 5,98 Ohm
  • force factor BL = 30,52 N/A
  • voice coil inductance L = 1,48 mH
  • effective mechanical mass incl. air load mms = 259,72 g
  • equivalent volume of compliance Vas = 150,58 l
  • total Q factor Qts = 0,34 (Qms=5,152, Qes=0,36)
  • voice coil diameter = 125 mm
  • maximum peak linear excursion vibration xlin = +/- 9 mm
  • mounting diameter d = 416 mm
  • overall diameter d = 462 mm
  • mounting depth (not countersunk) t = 233 mm
  • mass m = 23 kg
PDF data sheet

show kits to this chassis hide kits


 

21 inch woofer


open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 44 L volume
from 83/52 Hz (-3dB/-8dB)
 
recommended cabinet 2:
124 L volume bass reflex cabinet
with 4x HP100 reflex tube, 32 cm long.
from 46/36 Hz (-3dB/-8dB).

NTR21-5010JD       order no. cel-t5763       EUR 649,00 excl. VAT: € 545.38 / $ 643.55
53 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 1600 W
  • frequency range = 30-3000 Hz
  • resonance frequency fs = 30,2 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 5,36 Ohm
  • force factor BL = 32,39 N/A
  • voice coil inductance L = 2,063 mH
  • effective mechanical mass incl. air load mms = 318,85 g
  • equivalent volume of compliance Vas = 341,43 l
  • total Q factor Qts = 0,29 (Qms=5,231, Qes=0,309)
  • voice coil diameter = 125 mm
  • maximum peak linear excursion vibration xlin = +/- 9 mm
  • mounting diameter d = 492 mm
  • overall diameter d = 550 mm
  • mounting depth (not countersunk) t = 254 mm
  • mass m = 12,8 kg
PDF data sheet

show kits to this chassis hide kits


 

Coaxial speaker

FTX0617       order no. cel-t5931       EUR 129,69 excl. VAT: € 108.98 / $ 128.60
5 cm coax driver with paper with kevlar cone.
  • power handling (continuous/programme) = 150 W
  • frequency range = 110-20000 Hz
  • resonance frequency fs = 105,3 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 5,57 Ohm
  • force factor BL = 6,28 N/A
  • voice coil inductance L = 0,28 mH
  • effective mechanical mass incl. air load mms = 10,94 g
  • equivalent volume of compliance Vas = 7 l
  • total Q factor Qts = 0,81 (Qms=3,851, Qes=1,021)
  • voice coil diameter = 44 mm
  • maximum peak linear excursion vibration xlin = +/- 2 mm
  • mounting diameter d = 150 mm
  • mounting depth (not countersunk) t = 93 mm
  • mass m = 3 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 1,7 L volume
from 219/138 Hz (-3dB/-8dB)
 
recommended cabinet 2:
3,7 L volume bass reflex cabinet
with HP70 reflex tube, 19 cm long.
from 135/101 Hz (-3dB/-8dB).

FTX0820       order no. cel-t5910       EUR 165,00 excl. VAT: € 138.66 / $ 163.61
20 cm coax driver with paper with kevlar cone.
  • power handling (continuous/programme) = 200 W
  • frequency range = 70-20000 Hz
  • resonance frequency fs = 63,9 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 94 dB (2,83V; 1m)
  • DC resistance Re = 5,9 Ohm
  • force factor BL = 14,4 N/A
  • voice coil inductance L = 0,84 mH
  • effective mechanical mass incl. air load mms = 21,12 g
  • equivalent volume of compliance Vas = 21,38 l
  • total Q factor Qts = 0,23 (Qms=4,709, Qes=0,242)
  • voice coil diameter = 50 mm
  • maximum peak linear excursion vibration xlin = +/- 2 mm
  • mounting diameter d = 187 mm
  • overall diameter d = 210 mm
  • mounting depth (not countersunk) t = 114 mm
  • mass m = 4,1 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 23 L volume
from 98/62 Hz (-3dB/-8dB)
 
recommended cabinet 2:
85 L volume bass reflex cabinet
with 2x HP100 reflex tube, 11 cm long.
from 49/40 Hz (-3dB/-8dB).

FTX1225       order no. cel-t5911       EUR 254,00 excl. VAT: € 213.45 / $ 251.87
29 cm coax driver with paper with kevlar cone.
  • power handling (continuous/programme) = 300 W
  • frequency range = 50-20000 Hz
  • resonance frequency fs = 47,8 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 5,35 Ohm
  • force factor BL = 13,94 N/A
  • voice coil inductance L = 0,78 mH
  • effective mechanical mass incl. air load mms = 49,44 g
  • equivalent volume of compliance Vas = 89,55 l
  • total Q factor Qts = 0,38 (Qms=5,714, Qes=0,409)
  • voice coil diameter = 64 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 286 mm
  • overall diameter d = 305 mm
  • mounting depth (not countersunk) t = 168 mm
  • mass m = 5,9 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 13,3 L volume
from 134/84 Hz (-3dB/-8dB)
 
recommended cabinet 2:
52 L volume bass reflex cabinet
with 2x HP100 reflex tube, 8 cm long.
from 65/53 Hz (-3dB/-8dB).

TF1225CX       order no. cel-t5677       EUR 242,00 excl. VAT: € 203.36 / $ 239.97
.
  • power handling (continuous/programme) = 250 W
  • frequency range = 40-20000 Hz
  • resonance frequency fs = 71,4 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 5,57 Ohm
  • force factor BL = 16,08 N/A
  • voice coil inductance L = 0,23 mH
  • effective mechanical mass incl. air load mms = 49,68 g
  • equivalent volume of compliance Vas = 39,9 l
  • total Q factor Qts = 0,43 (Qms=3,824, Qes=0,48)
  • voice coil diameter = 64 mm
  • maximum peak linear excursion vibration xlin = +/- 2,5 mm
  • mounting diameter d = 286 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 172 mm
  • mass m = 4,6 kg
PDF data sheet

show kits to this chassis hide kits


 

Alnico

Alnico Blue (8 Ohm)       order no. cel-t4427       EUR 279,00 excl. VAT: € 234.45 / $ 276.66
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 15 W
  • resonance frequency fs = 75 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 100 dB (2,83V; 1m)
  • DC resistance Re = 6,4 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 165 mm
PDF data sheet

show kits to this chassis hide kits

Alnico Blue (15 Ohm)       order no. cel-t4436       EUR 279,00 excl. VAT: € 234.45 / $ 276.66
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 15 W
  • resonance frequency fs = 75 Hz
  • impedance R = 15 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 11,8 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 165 mm
PDF data sheet

show kits to this chassis hide kits

Alnico Cream (8 Ohm)       order no. cel-t5953       EUR 299,00 excl. VAT: € 251.26 / $ 296.49
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 90 W
  • resonance frequency fs = 75 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 100 dB (2,83V; 1m)
  • DC resistance Re = 6,7 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 165 mm
PDF data sheet

show kits to this chassis hide kits

Alnico Cream (16 Ohm)       order no. cel-t5954       EUR 299,00 excl. VAT: € 251.26 / $ 296.49
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 90 W
  • resonance frequency fs = 75 Hz
  • impedance R = 16 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 165 mm
PDF data sheet

show kits to this chassis hide kits

Alnico Gold (8 Ohm)       order no. cel-t5471       EUR 289,00 excl. VAT: € 242.86 / $ 286.57
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 50 W
  • resonance frequency fs = 75 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 100 dB (2,83V; 1m)
  • DC resistance Re = 6,4 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 165 mm
PDF data sheet

show kits to this chassis hide kits

Alnico Gold (16 Ohm)       order no. cel-t5472       EUR 289,00 excl. VAT: € 242.86 / $ 286.57
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 50 W
  • resonance frequency fs = 75 Hz
  • impedance R = 15 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 11,8 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 165 mm
PDF data sheet

show kits to this chassis hide kits

Alnico G10 Gold (8 Ohm)       order no. cel-t5671       EUR 229,00 excl. VAT: € 192.44 / $ 227.08
24 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 40 W
  • resonance frequency fs = 80 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 6,66 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 229 mm
  • overall diameter d = 256 mm
  • mounting depth (not countersunk) t = 135 mm
PDF data sheet

show kits to this chassis hide kits

Alnico G10 Gold (16 Ohm)       order no. cel-t5682       EUR 229,00 excl. VAT: € 192.44 / $ 227.08
24 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 40 W
  • resonance frequency fs = 80 Hz
  • impedance R = 16 Ohm
  • sound pressure level SPL = 95 dB (2,83V; 1m)
  • DC resistance Re = 13,56 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 229 mm
  • overall diameter d = 256 mm
  • mounting depth (not countersunk) t = 135 mm
PDF data sheet

show kits to this chassis hide kits


 

Heritage

Heritage G12-65 (8 Ohm)       order no. cel-t3053       EUR 159,00 excl. VAT: € 133.61 / $ 157.66
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 65 W
  • resonance frequency fs = 85 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 6,9 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 128 mm
PDF data sheet

show kits to this chassis hide kits

Heritage G12-65 (15 Ohm)       order no. cel-t3054       EUR 159,00 excl. VAT: € 133.61 / $ 157.66
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 65 W
  • resonance frequency fs = 85 Hz
  • impedance R = 15 Ohm
  • sound pressure level SPL = 94 dB (2,83V; 1m)
  • DC resistance Re = 11,8 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 128 mm
PDF data sheet

show kits to this chassis hide kits

Heritage G12H (55 Hz) (8 Ohm)       order no. cel-t1234       EUR 179,00 excl. VAT: € 150.42 / $ 177.50
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 30 W
  • resonance frequency fs = 55 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 100 dB (2,83V; 1m)
  • DC resistance Re = 6,53 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 135 mm
PDF data sheet

show kits to this chassis hide kits

Heritage G12H (55 Hz) (15 Ohm)       order no. cel-t1281       EUR 179,00 excl. VAT: € 150.42 / $ 177.50
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 30 W
  • resonance frequency fs = 55 Hz
  • impedance R = 15 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 12,11 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 135 mm
PDF data sheet

show kits to this chassis hide kits

Heritage G12H (75 Hz) (8 Ohm)       order no. cel-t1364       EUR 179,00 excl. VAT: € 150.42 / $ 177.50
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 30 W
  • frequency range = 75-5000 Hz
  • resonance frequency fs = 75 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 100 dB (2,83V; 1m)
  • DC resistance Re = 6,53 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 135 mm
PDF data sheet

show kits to this chassis hide kits

Heritage G12H (75 Hz) (16 Ohm)       order no. cel-t1363       EUR 179,00 excl. VAT: € 150.42 / $ 177.50
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 30 W
  • frequency range = 75-5000 Hz
  • resonance frequency fs = 75 Hz
  • impedance R = 15 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 12,11 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 135 mm
PDF data sheet

show kits to this chassis hide kits

Heritage G12M (8 Ohm)       order no. cel-t1220-67       EUR 169,00 excl. VAT: € 142.02 / $ 167.58
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 20 W
  • frequency range = 75-5000 Hz
  • resonance frequency fs = 75 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 96 dB (2,83V; 1m)
  • DC resistance Re = 6,57 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 130 mm
PDF data sheet

show kits to this chassis hide kits

Heritage G12M (15 Ohm)       order no. cel-t1221-67       EUR 169,00 excl. VAT: € 142.02 / $ 167.58
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 20 W
  • frequency range = 75-5000 Hz
  • resonance frequency fs = 75 Hz
  • impedance R = 15 Ohm
  • sound pressure level SPL = 93 dB (2,83V; 1m)
  • DC resistance Re = 12,13 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 130 mm
PDF data sheet

show kits to this chassis hide kits


 

Signature

Signature G12 EVH (8 Ohm)       order no. cel-t5658       EUR 169,00 excl. VAT: € 142.02 / $ 167.58
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 20 W
  • frequency range = 75-5000 Hz
  • resonance frequency fs = 75 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 96 dB (2,83V; 1m)
  • DC resistance Re = 6,57 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 130 mm
PDF data sheet

show kits to this chassis hide kits

Signature G12 EVH (15 Ohm)       order no. cel-t5670       EUR 169,00 excl. VAT: € 142.02 / $ 167.58
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 20 W
  • frequency range = 75-5000 Hz
  • resonance frequency fs = 75 Hz
  • impedance R = 15 Ohm
  • sound pressure level SPL = 93 dB (2,83V; 1m)
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 130 mm
PDF data sheet

show kits to this chassis hide kits

Signature G12-50GL Lynchback (8 Ohm)       order no. cel-t5797       EUR 145,00 excl. VAT: € 121.85 / $ 143.78
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 50 W
  • frequency range = 75-5000 Hz
  • resonance frequency fs = 75 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 130 mm
PDF data sheet

show kits to this chassis hide kits


 

Classic

Classic A-Type (8 Ohm)       order no. cel-t5925       EUR 99,00 excl. VAT: € 83.19 / $ 98.17
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 50 W
  • frequency range = 70-5000 Hz
  • resonance frequency fs = 75 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 123 mm
PDF data sheet

show kits to this chassis hide kits

Classic A-Type (16 Ohm)       order no. cel-t5930       EUR 99,00 excl. VAT: € 83.19 / $ 98.17
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 50 W
  • frequency range = 70-5000 Hz
  • resonance frequency fs = 75 Hz
  • impedance R = 16 Ohm
  • sound pressure level SPL = 95 dB (2,83V; 1m)
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 123 mm
PDF data sheet

show kits to this chassis hide kits

Classic Lead 80 (8 Ohm)       order no. cel-t3969       EUR 129,00 excl. VAT: € 108.40 / $ 127.92
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 80 W
  • frequency range = 80-5000 Hz
  • resonance frequency fs = 85 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 99 dB (2,83V; 1m)
  • DC resistance Re = 6,9 Ohm
  • voice coil diameter = 55,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 135 mm
PDF data sheet

show kits to this chassis hide kits

Classic Lead 80 (16 Ohm)       order no. cel-t3978       EUR 129,00 excl. VAT: € 108.40 / $ 127.92
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 80 W
  • frequency range = 80-5000 Hz
  • resonance frequency fs = 85 Hz
  • impedance R = 16 Ohm
  • sound pressure level SPL = 96 dB (2,83V; 1m)
  • DC resistance Re = 11,8 Ohm
  • voice coil diameter = 55,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 135 mm
PDF data sheet

show kits to this chassis hide kits

Classic G10 Greenback (8 Ohm)       order no. cel-t5646       EUR 109,00 excl. VAT: € 91.60 / $ 108.08
24 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 30 W
  • frequency range = 95-5500 Hz
  • resonance frequency fs = 98 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 95 dB (2,83V; 1m)
  • DC resistance Re = 6,4 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 229 mm
  • overall diameter d = 254 mm
  • mounting depth (not countersunk) t = 102 mm
PDF data sheet

show kits to this chassis hide kits

Classic G10 Greenback (16 Ohm)       order no. cel-t5647       EUR 109,00 excl. VAT: € 91.60 / $ 108.08
24 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 30 W
  • frequency range = 95-5500 Hz
  • resonance frequency fs = 98 Hz
  • impedance R = 16 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 12,05 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 229 mm
  • overall diameter d = 254 mm
  • mounting depth (not countersunk) t = 102 mm
PDF data sheet

show kits to this chassis hide kits

Classic G10 Vintage (8 Ohm)       order no. cel-t5373       EUR 89,00 excl. VAT: € 74.79 / $ 88.25
24 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 60 W
  • frequency range = 100-5500 Hz
  • resonance frequency fs = 115 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 7,47 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 229 mm
  • overall diameter d = 256 mm
  • mounting depth (not countersunk) t = 104 mm
PDF data sheet

show kits to this chassis hide kits

Classic G10 Vintage (16 Ohm)       order no. cel-t5381       EUR 89,00 excl. VAT: € 74.79 / $ 88.25
24 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 60 W
  • frequency range = 100-5500 Hz
  • resonance frequency fs = 115 Hz
  • impedance R = 16 Ohm
  • sound pressure level SPL = 94 dB (2,83V; 1m)
  • DC resistance Re = 12,33 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 229 mm
  • overall diameter d = 256 mm
  • mounting depth (not countersunk) t = 104 mm
PDF data sheet

show kits to this chassis hide kits

Classic G10N-40 (8 Ohm)       order no. cel-t5667       EUR 70,00 excl. VAT: € 58.82 / $ 69.41
24 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 40 W
  • frequency range = 95-5500 Hz
  • resonance frequency fs = 98 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 95 dB (2,83V; 1m)
  • DC resistance Re = 6,4 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 229 mm
  • overall diameter d = 256 mm
  • mounting depth (not countersunk) t = 102 mm
PDF data sheet

show kits to this chassis hide kits

Classic G10N-40 (16 Ohm)       order no. cel-t5684       EUR 70,00 excl. VAT: € 58.82 / $ 69.41
24 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 40 W
  • frequency range = 95-5500 Hz
  • resonance frequency fs = 98 Hz
  • impedance R = 16 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 12,05 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 229 mm
  • overall diameter d = 256 mm
  • mounting depth (not countersunk) t = 102 mm
PDF data sheet

show kits to this chassis hide kits

Classic G12 Century Vintage (8 Ohm)       order no. cel-t5347       EUR 179,00 excl. VAT: € 150.42 / $ 177.50
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 60 W
  • frequency range = 75-5000 Hz
  • resonance frequency fs = 70 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 6,88 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 128 mm
PDF data sheet

show kits to this chassis hide kits

Classic G12 Century Vintage (16 Ohm)       order no. cel-t5348       EUR 179,00 excl. VAT: € 150.42 / $ 177.50
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 60 W
  • frequency range = 75-5000 Hz
  • resonance frequency fs = 70 Hz
  • impedance R = 16 Ohm
  • sound pressure level SPL = 95 dB (2,83V; 1m)
  • DC resistance Re = 13,35 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 128 mm
PDF data sheet

show kits to this chassis hide kits

Classic G12-35XC (8 Ohm)       order no. cel-t5924       EUR 129,00 excl. VAT: € 108.40 / $ 127.92
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 35 W
  • frequency range = 75-5000 Hz
  • resonance frequency fs = 75 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 100 dB (2,83V; 1m)
  • DC resistance Re = 6,4 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 135 mm
PDF data sheet

show kits to this chassis hide kits

Classic G12-35XC (16 Ohm)       order no. cel-t5929       EUR 129,00 excl. VAT: € 108.40 / $ 127.92
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 35 W
  • frequency range = 75-5000 Hz
  • resonance frequency fs = 75 Hz
  • impedance R = 16 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 135 mm
PDF data sheet

show kits to this chassis hide kits

Classic G12H Anniversary (8 Ohm)       order no. cel-t4533       EUR 139,00 excl. VAT: € 116.81 / $ 137.83
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 30 W
  • frequency range = 75-5000 Hz
  • resonance frequency fs = 85 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 100 dB (2,83V; 1m)
  • DC resistance Re = 6,7 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 135 mm
PDF data sheet

show kits to this chassis hide kits

Classic G12H Anniversary (16 Ohm)       order no. cel-t4534       EUR 139,00 excl. VAT: € 116.81 / $ 137.83
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 30 W
  • frequency range = 75-5000 Hz
  • resonance frequency fs = 85 Hz
  • impedance R = 16 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 13,1 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 135 mm
PDF data sheet

show kits to this chassis hide kits

Classic G12H-75 Creamback (8 Ohm)       order no. cel-t5890       EUR 149,00 excl. VAT: € 125.21 / $ 147.75
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 75 W
  • frequency range = 70-5000 Hz
  • resonance frequency fs = 75 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 100 dB (2,83V; 1m)
  • DC resistance Re = 6,37 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 138 mm
PDF data sheet

show kits to this chassis hide kits

Classic G12H-75 Creamback (16 Ohm)       order no. cel-t5891       EUR 149,00 excl. VAT: € 125.21 / $ 147.75
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 75 W
  • frequency range = 70-5000 Hz
  • resonance frequency fs = 75 Hz
  • impedance R = 16 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 12,5 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 138 mm
PDF data sheet

show kits to this chassis hide kits

Classic G12K-100 (8 Ohm)       order no. cel-t3585       EUR 129,00 excl. VAT: € 108.40 / $ 127.92
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 100 W
  • frequency range = 80-5500 Hz
  • resonance frequency fs = 85 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 99 dB (2,83V; 1m)
  • DC resistance Re = 7 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 135 mm
PDF data sheet

show kits to this chassis hide kits

Classic G12M Greenback (8 Ohm)       order no. cel-t1220       EUR 125,00 excl. VAT: € 105.04 / $ 123.95
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 25 W
  • frequency range = 70-5000 Hz
  • resonance frequency fs = 75 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 6,7 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 130 mm
PDF data sheet

show kits to this chassis hide kits

Classic G12M Greenback (16 Ohm)       order no. cel-t1221       EUR 125,00 excl. VAT: € 105.04 / $ 123.95
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 25 W
  • frequency range = 70-5000 Hz
  • resonance frequency fs = 75 Hz
  • impedance R = 16 Ohm
  • sound pressure level SPL = 95 dB (2,83V; 1m)
  • DC resistance Re = 13,1 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 130 mm
PDF data sheet

show kits to this chassis hide kits

Classic G12M-65 Creamback (8 Ohm)       order no. cel-t5864       EUR 139,00 excl. VAT: € 116.81 / $ 137.83
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 65 W
  • frequency range = 70-5000 Hz
  • resonance frequency fs = 75 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 6,7 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 130 mm
PDF data sheet

show kits to this chassis hide kits

Classic G12M-65 Creamback (16 Ohm)       order no. cel-t5871       EUR 139,00 excl. VAT: € 116.81 / $ 137.83
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 65 W
  • frequency range = 70-5000 Hz
  • resonance frequency fs = 75 Hz
  • impedance R = 16 Ohm
  • sound pressure level SPL = 94 dB (2,83V; 1m)
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 130 mm
PDF data sheet

show kits to this chassis hide kits

Classic G12T-75 (8 Ohm)       order no. cel-t3781       EUR 115,00 excl. VAT: € 96.64 / $ 114.03
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 75 W
  • frequency range = 80-5000 Hz
  • resonance frequency fs = 75 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 6,77 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 127 mm
PDF data sheet

show kits to this chassis hide kits

Classic G12T-75 (16 Ohm)       order no. cel-t3760       EUR 115,00 excl. VAT: € 96.64 / $ 114.03
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 75 W
  • frequency range = 80-5000 Hz
  • resonance frequency fs = 75 Hz
  • impedance R = 16 Ohm
  • sound pressure level SPL = 94 dB (2,83V; 1m)
  • DC resistance Re = 12,9 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 127 mm
PDF data sheet

show kits to this chassis hide kits

Classic G15V-100 Fullback (8 Ohm)       order no. cel-t5948       EUR 139,00 excl. VAT: € 116.81 / $ 137.83
37 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 100 W
  • frequency range = 65-4000 Hz
  • resonance frequency fs = 85 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 99 dB (2,83V; 1m)
  • DC resistance Re = 6,4 Ohm
  • voice coil diameter = 50 mm
  • mounting diameter d = 351 mm
  • overall diameter d = 385 mm
  • mounting depth (not countersunk) t = 152,9 mm
PDF data sheet

show kits to this chassis hide kits

Classic Vintage 30 (8 Ohm)       order no. cel-t3903       EUR 125,00 excl. VAT: € 105.04 / $ 123.95
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 60 W
  • frequency range = 70-5000 Hz
  • resonance frequency fs = 75 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 100 dB (2,83V; 1m)
  • DC resistance Re = 7,3 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 135 mm
PDF data sheet

show kits to this chassis hide kits

Classic Vintage 30 (16 Ohm)       order no. cel-t3904       EUR 125,00 excl. VAT: € 105.04 / $ 123.95
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 60 W
  • frequency range = 70-5000 Hz
  • resonance frequency fs = 75 Hz
  • impedance R = 16 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 12,9 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 135 mm
PDF data sheet

show kits to this chassis hide kits

Classic V-Type (8 Ohm)       order no. cel-t5901       EUR 99,00 excl. VAT: € 83.19 / $ 98.17
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 70 W
  • frequency range = 70-5000 Hz
  • resonance frequency fs = 75 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 7,3 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 123 mm
PDF data sheet

show kits to this chassis hide kits

Classic V-Type (16 Ohm)       order no. cel-t5906       EUR 99,00 excl. VAT: € 83.19 / $ 98.17
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 70 W
  • frequency range = 70-5000 Hz
  • resonance frequency fs = 75 Hz
  • impedance R = 16 Ohm
  • sound pressure level SPL = 95 dB (2,83V; 1m)
  • DC resistance Re = 12,9 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 123 mm
PDF data sheet

show kits to this chassis hide kits


 

Originals

Originals Eight 15 (4 Ohm)       order no. cel-t5903       EUR 35,00 excl. VAT: € 29.41 / $ 34.71
19 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 15 W
  • frequency range = 100-5000 Hz
  • resonance frequency fs = 109,7 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • voice coil diameter = 25 mm
  • mounting diameter d = 183 mm
  • overall diameter d = 205 mm
  • mounting depth (not countersunk) t = 82,6 mm
PDF data sheet

show kits to this chassis hide kits

Originals Eight 15 (8 Ohm)       order no. cel-t5813       EUR 35,00 excl. VAT: € 29.41 / $ 34.71
19 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 15 W
  • frequency range = 100-5000 Hz
  • resonance frequency fs = 109,7 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 95 dB (2,83V; 1m)
  • DC resistance Re = 6,4 Ohm
  • voice coil diameter = 25 mm
  • mounting diameter d = 183 mm
  • overall diameter d = 205 mm
  • mounting depth (not countersunk) t = 82,6 mm
PDF data sheet

show kits to this chassis hide kits

Originals Eight 15 (16 Ohm)       order no. cel-t5852       EUR 35,00 excl. VAT: € 29.41 / $ 34.71
19 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 15 W
  • frequency range = 100-5000 Hz
  • resonance frequency fs = 109,7 Hz
  • impedance R = 16 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • voice coil diameter = 25 mm
  • mounting diameter d = 183 mm
  • overall diameter d = 205 mm
  • mounting depth (not countersunk) t = 82,6 mm
PDF data sheet

show kits to this chassis hide kits

Originals G12T Hot 100 (4 Ohm)       order no. cel-t5155       EUR 95,00 excl. VAT: € 79.83 / $ 94.20
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 100 W
  • frequency range = 80-5000 Hz
  • resonance frequency fs = 86 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 100 dB (2,83V; 1m)
  • DC resistance Re = 3,4 Ohm
  • voice coil diameter = 50,8 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 124 mm
PDF data sheet

show kits to this chassis hide kits

Originals G12T Hot 100 (8 Ohm)       order no. cel-t5156       EUR 95,00 excl. VAT: € 79.83 / $ 94.20
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 100 W
  • frequency range = 80-5000 Hz
  • resonance frequency fs = 86 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 7,4 Ohm
  • voice coil diameter = 50,8 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 124 mm
PDF data sheet

show kits to this chassis hide kits

Originals G12T Hot 100 (16 Ohm)       order no. cel-t5157       EUR 95,00 excl. VAT: € 79.83 / $ 94.20
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 100 W
  • frequency range = 80-5000 Hz
  • resonance frequency fs = 86 Hz
  • impedance R = 16 Ohm
  • sound pressure level SPL = 94 dB (2,83V; 1m)
  • DC resistance Re = 14,83 Ohm
  • voice coil diameter = 50,8 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 124 mm
PDF data sheet

show kits to this chassis hide kits

Originals Rocket 50 (8 Ohm)       order no. cel-t5606       EUR 59,00 excl. VAT: € 49.58 / $ 58.50
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 50 W
  • frequency range = 85-5000 Hz
  • resonance frequency fs = 90 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 95 dB (2,83V; 1m)
  • DC resistance Re = 6,74 Ohm
  • voice coil diameter = 38,1 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 122 mm
PDF data sheet

show kits to this chassis hide kits

Originals Rocket 50 (16 Ohm)       order no. cel-t5610       EUR 59,00 excl. VAT: € 49.58 / $ 58.50
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 50 W
  • frequency range = 85-5000 Hz
  • resonance frequency fs = 90 Hz
  • impedance R = 16 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • voice coil diameter = 38,1 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 122 mm
PDF data sheet

show kits to this chassis hide kits

Originals Seventy 80 (8 Ohm)       order no. cel-t5605       EUR 79,00 excl. VAT: € 66.39 / $ 78.34
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 80 W
  • frequency range = 80-5000 Hz
  • resonance frequency fs = 85 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 6,1 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 119 mm
PDF data sheet

show kits to this chassis hide kits

Originals Seventy 80 (16 Ohm)       order no. cel-t5603       EUR 79,00 excl. VAT: € 66.39 / $ 78.34
30 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 80 W
  • frequency range = 80-5000 Hz
  • resonance frequency fs = 85 Hz
  • impedance R = 16 Ohm
  • sound pressure level SPL = 95 dB (2,83V; 1m)
  • DC resistance Re = 10,41 Ohm
  • voice coil diameter = 44,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 119 mm
PDF data sheet

show kits to this chassis hide kits

Originals Ten 30 (8 Ohm)       order no. cel-t5814       EUR 49,00 excl. VAT: € 41.18 / $ 48.59
24 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 30 W
  • frequency range = 85-5000 Hz
  • resonance frequency fs = 93,9 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 95 dB (2,83V; 1m)
  • DC resistance Re = 6 Ohm
  • voice coil diameter = 31,25 mm
  • mounting diameter d = 229 mm
  • overall diameter d = 256 mm
  • mounting depth (not countersunk) t = 96 mm
PDF data sheet

show kits to this chassis hide kits


 

Bass_Guitar


open a bigger photo

recommended cabinet 1:
closed cabinet with 17 L volume
from 115/73 Hz (-3dB/-8dB)
 
recommended cabinet 2:
68 L volume bass reflex cabinet
with HP100 reflex tube, 3 cm long.
from 52/45 Hz (-3dB/-8dB).

BL10-100X (8 Ohm)       order no. cel-t5629       EUR 59,00 excl. VAT: € 49.58 / $ 58.50
24 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 200 W
  • frequency range = 45-3500 Hz
  • resonance frequency fs = 76,7 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 94 dB (2,83V; 1m)
  • DC resistance Re = 6,67 Ohm
  • force factor BL = 11,98 N/A
  • voice coil inductance L = 0,73 mH
  • equivalent volume of compliance Vas = 25,06 l
  • total Q factor Qts = 0,53 (Qms=2,878, Qes=0,653)
  • voice coil diameter = 38,1 mm
  • maximum peak linear excursion vibration xlin = +/- 3,5 mm
  • mounting diameter d = 229 mm
  • overall diameter d = 256 mm
  • mounting depth (not countersunk) t = 107 mm
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 11,1 L volume
from 120/76 Hz (-3dB/-8dB)
 
recommended cabinet 2:
45 L volume bass reflex cabinet
with HP100 reflex tube, 6 cm long.
from 56/47 Hz (-3dB/-8dB).

BL10-200X (8 Ohm)       order no. cel-t5621       EUR 82,00 excl. VAT: € 68.91 / $ 81.31
24 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 200 W
  • frequency range = 45-3500 Hz
  • resonance frequency fs = 73 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 94 dB (2,83V; 1m)
  • DC resistance Re = 5,8 Ohm
  • force factor BL = 13,02 N/A
  • voice coil inductance L = 0,92 mH
  • equivalent volume of compliance Vas = 22,74 l
  • total Q factor Qts = 0,48 (Qms=3,58, Qes=0,56)
  • voice coil diameter = 50,8 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 229 mm
  • overall diameter d = 256 mm
  • mounting depth (not countersunk) t = 110 mm
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 33 L volume
from 86/54 Hz (-3dB/-8dB)
 
recommended cabinet 2:
126 L volume bass reflex cabinet
with 2x HP100 reflex tube, 8 cm long.
from 42/34 Hz (-3dB/-8dB).

BL12-200X (8 Ohm)       order no. cel-t5624       EUR 89,00 excl. VAT: € 74.79 / $ 88.25
30 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 200 W
  • frequency range = 45-3500 Hz
  • resonance frequency fs = 45 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 94 dB (2,83V; 1m)
  • DC resistance Re = 5,88 Ohm
  • force factor BL = 12,71 N/A
  • voice coil inductance L = 1 mH
  • equivalent volume of compliance Vas = 104,64 l
  • total Q factor Qts = 0,42 (Qms=2,74, Qes=0,49)
  • voice coil diameter = 50,8 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 130 mm
PDF data sheet

show kits to this chassis hide kits

BL15-300X (4 Ohm)       order no. cel-t5635       EUR 119,00 excl. VAT: € 100.00 / $ 118.00
37 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 300 W
  • frequency range = 42-3500 Hz
  • resonance frequency fs = 48,1 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 96 dB (2,83V; 1m)
  • DC resistance Re = 3,15 Ohm
  • force factor BL = 8,83 N/A
  • voice coil inductance L = 0,47 mH
  • equivalent volume of compliance Vas = 137,69 l
  • total Q factor Qts = 0,75 (Qms=2,989, Qes=1,004)
  • voice coil diameter = 63,5 mm
  • maximum peak linear excursion vibration xlin = +/- 4,24 mm
  • mounting diameter d = 351 mm
  • overall diameter d = 385 mm
  • mounting depth (not countersunk) t = 162 mm
PDF data sheet

show kits to this chassis hide kits

BL15-400X (8 Ohm)       order no. cel-t5627       EUR 155,00 excl. VAT: € 130.25 / $ 153.70
37 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 400 W
  • frequency range = 40-3500 Hz
  • resonance frequency fs = 54,2 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 96 dB (2,83V; 1m)
  • DC resistance Re = 5,8 Ohm
  • force factor BL = 14,98 N/A
  • voice coil inductance L = 1 mH
  • equivalent volume of compliance Vas = 110,85 l
  • total Q factor Qts = 0,59 (Qms=3,578, Qes=0,709)
  • voice coil diameter = 76,2 mm
  • maximum peak linear excursion vibration xlin = +/- 4,75 mm
  • mounting diameter d = 351 mm
  • overall diameter d = 385 mm
  • mounting depth (not countersunk) t = 162 mm
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 4,6 L volume
from 167/106 Hz (-3dB/-8dB)
 
recommended cabinet 2:
14 L volume bass reflex cabinet
with HP100 reflex tube, 16 cm long.
from 91/70 Hz (-3dB/-8dB).

BN10-200X (8 Ohm)       order no. cel-t5622       EUR 139,00 excl. VAT: € 116.81 / $ 137.83
24 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 200 W
  • frequency range = 45-3500 Hz
  • resonance frequency fs = 65 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 96 dB (2,83V; 1m)
  • DC resistance Re = 5,8 Ohm
  • force factor BL = 15,03 N/A
  • voice coil inductance L = 0,68 mH
  • equivalent volume of compliance Vas = 31,15 l
  • total Q factor Qts = 0,31 (Qms=3,57, Qes=0,34)
  • voice coil diameter = 50,8 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 229 mm
  • overall diameter d = 256 mm
  • mounting depth (not countersunk) t = 112 mm
PDF data sheet

show kits to this chassis hide kits

BN12-300S (8 Ohm)       order no. cel-t5619       EUR 159,00 excl. VAT: € 133.61 / $ 157.66
30 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 300 W
  • frequency range = 50-4000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 96 dB (2,83V; 1m)
  • voice coil diameter = 63,5 mm
  • maximum peak linear excursion vibration xlin = +/- 2,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 132 mm
PDF data sheet

show kits to this chassis hide kits

BN15-400X (8 Ohm)       order no. cel-t5623       EUR 249,00 excl. VAT: € 209.24 / $ 246.91
37 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 400 W
  • frequency range = 38-3000 Hz
  • resonance frequency fs = 44,9 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 95 dB (2,83V; 1m)
  • DC resistance Re = 5,34 Ohm
  • force factor BL = 13,59 N/A
  • voice coil inductance L = 1,22 mH
  • equivalent volume of compliance Vas = 146,48 l
  • total Q factor Qts = 0,59 (Qms=3,27, Qes=0,72)
  • voice coil diameter = 76,2 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 351 mm
  • overall diameter d = 385 mm
  • mounting depth (not countersunk) t = 152 mm
PDF data sheet

show kits to this chassis hide kits


 

PA Repair Kits

CDX1-1747 diaphragm, 8 Ohm       order no. cel-t5572       EUR 50,00 excl. VAT: € 42.02 / $ 49.58
.

show kits to this chassis hide kits

CDX1-14 PETP diaphragm for CDX1-1445, 1446       order no. cel-t5549       EUR 28,00 excl. VAT: € 23.53 / $ 27.76
.

show kits to this chassis hide kits

CDX1-14 AL diaphragm for 1415, 1425, 1430       order no. cel-t5503       EUR 40,00 excl. VAT: € 33.61 / $ 39.66
.

show kits to this chassis hide kits

CDX1-14 AL diaphragm, 16 Ohm for 1415 / 1425 / 1430       order no. cel-t5542       EUR 40,00 excl. VAT: € 33.61 / $ 39.66
.

show kits to this chassis hide kits

CDX1-17 PETP diaphragm for CDX1-1745, 1746, 1730, 1731       order no. cel-t5510       EUR 45,00 excl. VAT: € 37.82 / $ 44.62
.

show kits to this chassis hide kits

CDX1-17 PETP diaphragm, 16 Ohm for CDX1-1745, 1746, 1730, 1731       order no. cel-t5523       EUR 45,00 excl. VAT: € 37.82 / $ 44.62
.

show kits to this chassis hide kits

CDX14/20 TI diaphragm for CDX14- 3050, 3060, CDX20-3075, 3000       order no. cel-t5526       EUR 95,00 excl. VAT: € 79.83 / $ 94.20
.

show kits to this chassis hide kits

CDX14/20 TI diaphragm, 16 Ohm for CDX14- 3050, 3060, CDX20-3075, 3000       order no. cel-t5538       EUR 95,00 excl. VAT: € 79.83 / $ 94.20
.

show kits to this chassis hide kits

Repair Kit for CF1830E       order no. cel-t5559       EUR 136,00 excl. VAT: € 114.29 / $ 134.86
.
  • impedance R = 8 Ohm

show kits to this chassis hide kits

Repair Kit for CF1840JD       order no. cel-t5564       EUR 190,00 excl. VAT: € 159.66 / $ 188.40
.
  • impedance R = 8 Ohm

show kits to this chassis hide kits

Repair Kit for CF18VJD       order no. cel-t5558       EUR 257,00 excl. VAT: € 215.97 / $ 254.84
.
  • impedance R = 8 Ohm

show kits to this chassis hide kits

Repair Kit for FTR12-3070C       order no. cel-t5529       EUR 79,00 excl. VAT: € 66.39 / $ 78.34
.
  • impedance R = 8 Ohm

show kits to this chassis hide kits

Repair Kit for FTR15-3070C       order no. cel-t5531       EUR 90,00 excl. VAT: € 75.63 / $ 89.24
.
  • impedance R = 8 Ohm

show kits to this chassis hide kits

Repair Kit for FTR15-3070E       order no. cel-t5532       EUR 90,00 excl. VAT: € 75.63 / $ 89.24
.
  • impedance R = 8 Ohm

show kits to this chassis hide kits

Repair Kit for FTR15-4080HDX       order no. cel-t5530       EUR 167,00 excl. VAT: € 140.34 / $ 165.60
.
  • impedance R = 8 Ohm

show kits to this chassis hide kits

Repair Kit for FTR18-4080F       order no. cel-t5543       EUR 169,00 excl. VAT: € 142.02 / $ 167.58
.
  • impedance R = 8 Ohm

show kits to this chassis hide kits

Repair Kit for FTR18-4080FD       order no. cel-t5528       EUR 178,00 excl. VAT: € 149.58 / $ 176.50
.
  • impedance R = 8 Ohm

show kits to this chassis hide kits

Repair Kit for FTR18-4080HDX       order no. cel-t5527       EUR 183,00 excl. VAT: € 153.78 / $ 181.46
.
  • impedance R = 8 Ohm

show kits to this chassis hide kits


 

Guitar Repair Kits

Repair Kit for Celestion Gold (8 Ohm)       order no. cel-t5587       EUR 90,00 excl. VAT: € 75.63 / $ 89.24
.
  • impedance R = 8 Ohm

show kits to this chassis hide kits

Repair Kit for Celestion Gold (15 Ohm)       order no. cel-t5588       EUR 90,00 excl. VAT: € 75.63 / $ 89.24
.
  • impedance R = 15 Ohm

show kits to this chassis hide kits

Repair Kit for Celestion Blue (8 Ohm)       order no. cel-t4427-R       EUR 90,00 excl. VAT: € 75.63 / $ 89.24
.
  • impedance R = 8 Ohm

show kits to this chassis hide kits

Repair Kit for Celestion Blue (15 Ohm)       order no. cel-t4436-R       EUR 90,00 excl. VAT: € 75.63 / $ 89.24
.
  • impedance R = 15 Ohm

show kits to this chassis hide kits

Repair Kit for G12-65 / Classic Lead 80 (8 Ohm)       order no. cel-t3969-R       EUR 70,00 excl. VAT: € 58.82 / $ 69.41
.
  • impedance R = 8 Ohm

show kits to this chassis hide kits

Repair Kit for G12M / G12H Anniversary (8 Ohm)       order no. cel-t1220-R       EUR 70,00 excl. VAT: € 58.82 / $ 69.41
.
  • impedance R = 8 Ohm

show kits to this chassis hide kits

Repair Kit for G12M / G12H Anniversary (16 Ohm)       order no. cel-t1221-R       EUR 70,00 excl. VAT: € 58.82 / $ 69.41
.
  • impedance R = 16 Ohm

show kits to this chassis hide kits

Repair Kit for G12M / G12H Creamback (8 Ohm)       order no. cel-t5561       EUR 83,00 excl. VAT: € 69.75 / $ 82.30
.
  • impedance R = 8 Ohm

show kits to this chassis hide kits

Repair Kit for G12M / G12H Creamback (16 Ohm)       order no. cel-t5562       EUR 83,00 excl. VAT: € 69.75 / $ 82.30
.
  • impedance R = 16 Ohm

show kits to this chassis hide kits

Repair Kit for G12T-75 / G12K-100 (8 Ohm)       order no. cel-t3594-R       EUR 70,00 excl. VAT: € 58.82 / $ 69.41
.
  • impedance R = 8 Ohm

show kits to this chassis hide kits

Repair Kit for Heritage G12M / G12H (75Hz) (8 Ohm)       order no. cel-t5534       EUR 90,00 excl. VAT: € 75.63 / $ 89.24
.
  • impedance R = 8 Ohm

show kits to this chassis hide kits

Repair Kit for Heritage G12M / G12H (75Hz) (15 Ohm)       order no. cel-t5535       EUR 90,00 excl. VAT: € 75.63 / $ 89.24
.
  • impedance R = 15 Ohm

show kits to this chassis hide kits

Repair Kit for Heritage G12H (55Hz) (8 Ohm)       order no. cel-t5536       EUR 90,00 excl. VAT: € 75.63 / $ 89.24
.
  • impedance R = 8 Ohm

show kits to this chassis hide kits

Repair Kit for Heritage G12H (55Hz) (16 Ohm)       order no. cel-t5537       EUR 90,00 excl. VAT: € 75.63 / $ 89.24
.
  • impedance R = 15 Ohm

show kits to this chassis hide kits

Repair Kit for Vintage 30 (8 Ohm)       order no. cel-t3903-R       EUR 70,00 excl. VAT: € 58.82 / $ 69.41
.
  • impedance R = 8 Ohm

show kits to this chassis hide kits

Repair Kit for Vintage 30 (16 Ohm)       order no. cel-t3904-R       EUR 70,00 excl. VAT: € 58.82 / $ 69.41
.
  • impedance R = 16 Ohm

show kits to this chassis hide kits


 

no longer sold

CDX1, Plastic Screw Adaptor       order no. cel-sp11906       EUR 4,28 excl. VAT: € 3.60 / $ 4.24
.

show kits to this chassis hide kits

H1-9040P       order no. cel-t5359       EUR 12,80 excl. VAT: € 10.76 / $ 12.69
Horn for a compression driver with 1 inch throat.
  • nominal angle (HxV) = 90 x 40 Deg
  • material: synthetics ABS
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

open a bigger photo

recommended cabinet 1:
closed cabinet with 19 L volume
from 114/72 Hz (-3dB/-8dB)
 
recommended cabinet 2:
45 L volume bass reflex cabinet
with 2x HP100 reflex tube, 20 cm long.
from 69/52 Hz (-3dB/-8dB).

NTR15-3018E       order no. not-available       - not available
37 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 450 W
  • frequency range = 30-3000 Hz
  • resonance frequency fs = 34,6 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 5,58 Ohm
  • force factor BL = 21,2 N/A
  • voice coil inductance L = 1,18 mH
  • effective mechanical mass incl. air load mms = 97,24 g
  • equivalent volume of compliance Vas = 225,7 l
  • total Q factor Qts = 0,25 (Qms=3,856, Qes=0,262)
  • voice coil diameter = 75 mm
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 351 mm
  • overall diameter d = 386 mm
  • mounting depth (not countersunk) t = 162 mm
  • mass m = 4 kg
PDF data sheet

show kits to this chassis hide kits

TF1530p       order no. not-available       - not available
37 cm bass driver with paper with kevlar cone.
  • voice coil diameter = 75 mm

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 9,2 L volume
from 147/93 Hz (-3dB/-8dB)
 
recommended cabinet 2:
30 L volume bass reflex cabinet
with 2x HP100 reflex tube, 17 cm long.
from 78/61 Hz (-3dB/-8dB).

TN1225       order no. not-available       - not available
30 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 250 W
  • frequency range = 50-4000 Hz
  • resonance frequency fs = 60,5 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 97 dB (2,83V; 1m)
  • DC resistance Re = 5,18 Ohm
  • force factor BL = 16,48 N/A
  • voice coil inductance L = 0,63 mH
  • effective mechanical mass incl. air load mms = 51,15 g
  • equivalent volume of compliance Vas = 53,92 l
  • total Q factor Qts = 0,33 (Qms=3,03, Qes=0,37)
  • voice coil diameter = 64 mm
  • maximum peak linear excursion vibration xlin = +/- 2,5 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 132 mm
  • mass m = 2 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 3,4 L volume
from 215/135 Hz (-3dB/-8dB)
 
recommended cabinet 2:
10 L volume bass reflex cabinet
with HP100 reflex tube, 13 cm long.
from 119/91 Hz (-3dB/-8dB).

TN1020       order no. not-available       - not available
24 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 150 W
  • frequency range = 65-4000 Hz
  • resonance frequency fs = 80,7 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 5,62 Ohm
  • force factor BL = 14,84 N/A
  • voice coil inductance L = 0,46 mH
  • effective mechanical mass incl. air load mms = 26,82 g
  • equivalent volume of compliance Vas = 24,62 l
  • total Q factor Qts = 0,3 (Qms=2,24, Qes=0,35)
  • voice coil diameter = 50 mm
  • maximum peak linear excursion vibration xlin = +/- 2 mm
  • mounting diameter d = 229 mm
  • overall diameter d = 256 mm
  • mounting depth (not countersunk) t = 110 mm
  • mass m = 1,5 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 3,5 L volume
from 147/93 Hz (-3dB/-8dB)
 
recommended cabinet 2:
7,8 L volume bass reflex cabinet
with HP50 reflex tube, 9 cm long.
from 91/68 Hz (-3dB/-8dB).

TN0820       order no. not-available       - not available
19 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 150 W
  • frequency range = 60-4000 Hz
  • resonance frequency fs = 42,8 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 94 dB (2,83V; 1m)
  • DC resistance Re = 5,7 Ohm
  • force factor BL = 11,09 N/A
  • voice coil inductance L = 0,64 mH
  • effective mechanical mass incl. air load mms = 22,3 g
  • equivalent volume of compliance Vas = 45,34 l
  • total Q factor Qts = 0,23 (Qms=1,34, Qes=0,28)
  • voice coil diameter = 50 mm
  • maximum peak linear excursion vibration xlin = +/- 2 mm
  • mounting diameter d = 183 mm
  • overall diameter d = 208 mm
  • mounting depth (not countersunk) t = 100 mm
  • mass m = 1,3 kg
PDF data sheet

show kits to this chassis hide kits

TF1215       order no. not-available       - not available
30 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 100 W
  • frequency range = 60-5000 Hz
  • resonance frequency fs = 62,5 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 95 dB (2,83V; 1m)
  • DC resistance Re = 5,85 Ohm
  • force factor BL = 8,02 N/A
  • voice coil inductance L = 0,5 mH
  • effective mechanical mass incl. air load mms = 33,91 g
  • equivalent volume of compliance Vas = 69,2 l
  • total Q factor Qts = 1,09 (Qms=6,297, Qes=1,311)
  • voice coil diameter = 38 mm
  • maximum peak linear excursion vibration xlin = +/- 2 mm
  • mounting diameter d = 283 mm
  • overall diameter d = 309 mm
  • mounting depth (not countersunk) t = 124 mm
  • mass m = 2,4 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 15 L volume
from 122/77 Hz (-3dB/-8dB)
 
recommended cabinet 2:
61 L volume bass reflex cabinet
with HP100 reflex tube, 3 cm long.
from 55/47 Hz (-3dB/-8dB).

TF1018       order no. not-available       - not available
24 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 100 W
  • frequency range = 70-6000 Hz
  • resonance frequency fs = 79,8 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 96 dB (2,83V; 1m)
  • DC resistance Re = 5,73 Ohm
  • force factor BL = 11,42 N/A
  • voice coil inductance L = 0,54 mH
  • effective mechanical mass incl. air load mms = 28,31 g
  • equivalent volume of compliance Vas = 23,84 l
  • total Q factor Qts = 0,53 (Qms=3,381, Qes=0,624)
  • voice coil diameter = 45 mm
  • maximum peak linear excursion vibration xlin = +/- 2 mm
  • mounting diameter d = 229 mm
  • overall diameter d = 256 mm
  • mounting depth (not countersunk) t = 102 mm
  • mass m = 2,4 kg
PDF data sheet

show kits to this chassis hide kits

BN8-100X (8 Ohm)       order no. not-available       - not available
19 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 200 W
  • frequency range = 60-4000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 94 dB (2,83V; 1m)
  • voice coil diameter = 50,8 mm
  • mounting diameter d = 183 mm
  • overall diameter d = 208 mm
  • mounting depth (not countersunk) t = 100 mm
PDF data sheet

show kits to this chassis hide kits

BN15-300S (8 Ohm)       order no. not-available       - not available
37 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 300 W
  • frequency range = 47-4000 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 96 dB (2,83V; 1m)
  • voice coil diameter = 63,5 mm
  • maximum peak linear excursion vibration xlin = +/- 2,5 mm
  • mounting diameter d = 351 mm
  • overall diameter d = 385 mm
  • mounting depth (not countersunk) t = 152 mm
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 65 L volume
from 75/47 Hz (-3dB/-8dB)
 
recommended cabinet 2:
259 L volume bass reflex cabinet
with 4x HP100 reflex tube, 10 cm long.
from 36/29 Hz (-3dB/-8dB).

BN15-400S (4 Ohm)       order no. not-available       - not available
37 cm bass driver with paper with kevlar cone.
  • power handling (continuous/programme) = 400 W
  • frequency range = 42-3500 Hz
  • resonance frequency fs = 41,6 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 3,08 Ohm
  • force factor BL = 12,41 N/A
  • voice coil inductance L = 0,44 mH
  • equivalent volume of compliance Vas = 171,9 l
  • total Q factor Qts = 0,43 (Qms=5,98, Qes=0,46)
  • voice coil diameter = 76,2 mm
  • maximum peak linear excursion vibration xlin = +/- 2,5 mm
  • mounting diameter d = 351 mm
  • overall diameter d = 385 mm
  • mounting depth (not countersunk) t = 152 mm
PDF data sheet

show kits to this chassis hide kits

Horn Driver   Full Range   Mids   Horn   5 inch woofer   6 inch woofer   8 inch woofer   10 inch woofer   12 inch woofer   15 inch woofer   18 inch woofer   21 inch woofer   Coaxial speaker   Alnico   Heritage   Signature   Classic   Originals   Bass_Guitar   PA Repair Kits   Guitar Repair Kits   no longer sold  
The cabinet volume calculations are executed considering an external resistance of 0.3 Ohm. We are using, if no other data is known or available, the information supplied by the manufacturer.

Please note: the frequency response doesn't say much about the cut-off frequency inside the cabinet! Therefore, we mostly give you 2 examples with dimensioning considerations and an indication, how low the loudspeaker will reproduce.

Home  
 
© Copyright 2015 Iris Strassacker; All rights reserved. - errors and omissions excepted